Results 1 to 6 of 6

Thread: almost done

  1. #1

    Join Date
    Jun 2005
    Location
    lakeland florida
    Posts
    36

    almost done

    ok my 04 rxp has been in the shop for 2 months waiting on all the parts from seadoo they finally came in, while I was waiting I ordered the stage 3 from riva, my question is how much torque do they put on the sc so that it does not break , I have the local seadoo shop doing it , and I think you guys know more about this than they do and if you can think of anything else I can tell them I would apreciate a bunch thanks


  2. #2
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    34,961
    +1
    1,885
    If you are talking about the supercharger impeller nut it is torqued to 22 ft lbs. It is left hand threads!

  3. #3

    Join Date
    Jun 2005
    Location
    lakeland florida
    Posts
    36
    is that the one every one is talking about, the one were they put ceramic washers on

  4. #4
    mxl16's Avatar
    Join Date
    May 2005
    Location
    Central NJ
    Posts
    1,590
    riva has a stage 3?

  5. #5
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    34,961
    +1
    1,885
    You don't have to mess with the clutch where the ceramic washers are.

    You will be removing the front housing off of the supercharger and removing the impeller by removing the nut.

    No, Riva has a Stage 2

  6. #6

    Join Date
    Jun 2005
    Location
    lakeland florida
    Posts
    36
    I'm sorry stage 2

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Hey guys my 2nd seat is almost done take a look.
    By mikegpr03 in forum Yamaha PWC Performance (2-stroke)
    Replies: 46
    Last Post: 03-21-2012, 04:00 PM
  2. Rebuild almost done !
    By Shawn001ca in forum Polaris Open Discussion
    Replies: 7
    Last Post: 07-25-2007, 02:34 PM
  3. Project ski is almost done!! Updated pics = )
    By slow1300 in forum Yamaha PWC Performance (2-stroke)
    Replies: 7
    Last Post: 07-08-2007, 11:49 PM
  4. Ski's almost done take a look guys
    By mikegpr03 in forum Yamaha PWC Performance (2-stroke)
    Replies: 12
    Last Post: 12-27-2006, 07:35 PM
  5. Almost Done With This Job In Miami
    By Fercho in forum Yamaha Open Discussion
    Replies: 5
    Last Post: 07-28-2006, 11:13 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •