Thread: 650 Dome Replacement!
05-21-2009, 01:51 PM #1
650 Dome Replacement!
how do i go about doing this... i bought two heads from u887266
the heads seem like a rod was thrown inside one piston.... one dome on each head needs replacing....
any ideas or answers as to how to do this?
05-21-2009, 02:48 PM #2
05-30-2009, 12:51 PM #3
You could take them to a machine shop and have them shaved and resurfaced, it will boost up compression and give you more power also.
Other than that your only other option would be to buy a new head, as far as I know the domes on a factory head are not replaceable
05-31-2009, 03:57 PM #4
yeah, you cant replace the domes. you can get it machined again but heads are cheap, id just buy a good used one w/no damage.
unless you want to do a groupk package, they may be able to do the work
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By 650sl95 in forum Polaris Open DiscussionReplies: 4Last Post: 09-27-2013, 04:48 PM
By shootfighter in forum Polaris Open DiscussionReplies: 6Last Post: 06-16-2011, 06:53 PM
By Bradley650sx in forum Kawasaki How To & FAQsReplies: 1Last Post: 07-27-2008, 09:32 AM
By john73 in forum Polaris Open DiscussionReplies: 5Last Post: 09-24-2007, 07:07 PM
By dkpralle in forum Polaris How To & FAQsReplies: 2Last Post: 04-27-2007, 12:07 AM