Thread: Grips for the X
05-26-2009, 02:08 PM #1
Grips for the X
I'm not happy with the rxpx grips, just way to hard for me. Can i get atv grips or such? I did a couple searches and didn't come up with much. I'm not looking to replacing my bars, just looking for something make work with the stock bars. Thanks
05-26-2009, 02:14 PM #2
- Join Date
- May 2005
- Cumming, GA
Take a look at the ODI grips. They should work for you.
05-26-2009, 05:46 PM #3
05-26-2009, 06:52 PM #4
First time I rode my hands were bleeding (I work out but always wear gloves) Since then I bought some inexpensive AXO riding gloves off of Ebay and wear them all the time when I ride.
05-26-2009, 07:59 PM #5
ODI grips are great just installed some on my rxp. compound feels softer and more comfortable!
05-26-2009, 08:01 PM #6
Listen to the people ODI grips are the best period! Cheap and very high quality!
05-26-2009, 08:06 PM #7
- Join Date
- Jul 2007
- PDX - Oregon
I also got some ODI grips for my p=x. I got the shorter ones and fitment was still a problem. I had to take off the "X" steering pad to get them to fit on all the way.
My plan was to just buy a cross bar pad for the stock X bars, but that didn't work well so I got a nice set of Renthal bars. Pretty much the same throw, but they have an extra 2" on each side of the bars.
Here's a couple pics.....
05-26-2009, 08:09 PM #8
- Join Date
- Jul 2008
two types of ODI's though
I have the X-treme and they are not soft, they are a thinner rubber compound than my buddies Rogue's. THe Rogue's are THICKER, SOFTER and MORE COMFORTABLE in my experience. My X-Treme's are good for my SHORT / FAT fingers though!
The Grips on PDXRealtor's X above are the Rogues 'more comfortable'....
05-26-2009, 08:53 PM #9
The rogues are very soft and if you wear gloves they wear out in about a season but if i'm not mistakenthey're only about $15 to replace and they're way easier to remove and install than anything that glues on.
05-27-2009, 05:17 AM #10
so if i want the odi grips they definatley won't work on the stock grips? Will 1 1/8" bars fit or only 7/8"?
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By jtskier11 in forum Yamaha PWC Performance (4-stroke)Replies: 17Last Post: 07-08-2015, 01:59 PM
By pinepear in forum Kawasaki PWC Performance (4-stroke)Replies: 3Last Post: 11-10-2009, 10:52 PM
By baba850r in forum 4-Tec PerformanceReplies: 16Last Post: 06-08-2009, 01:59 AM
By hdsilverado in forum Sea Doo Open DiscussionReplies: 3Last Post: 04-06-2008, 09:18 AM
By Therock in forum 4-Tec PerformanceReplies: 3Last Post: 05-20-2005, 07:13 AM