Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 28

Thread: 951/1050 parts

  1. #1

    Join Date
    May 2005
    Location
    so cal
    Posts
    265

    951/1050 parts

    all of these items are sold. thanks


    Coffman pipe and manifold adapter , for xpl, stinger has been opened up for 1050,will work for 951, no leaks
    $600 + shipping.

    1200 bottom end. 8mm stroker, Cases were done by Dean and crank was rebuilt with around 10 hrs on it. (this is one item I don’t have in my hands, should be receiving in the next few weeks) assembled. Was used at world finals a couple of years ago. Pm if interested. (pending)

    1050 motor. Miller head, pistons and porting was done by Mel. This motor has under 10 hrs on it. It can run on pump but I always ran 50/50 on it as the squish was set up kind of tight on this motor. With this motor in a xpl with stock pump, it will jump a stock rxp out of the hole by around 3 ski length and will walk away after that. $1800 + shipping.

    99 mpem programmed with Dean’s curve. Includes key $350 shipped (sold)

    Complete 951 bottom end, cases ported by dean, crank built by rad with pro x rods which were lightened, counterbalance was rebuilt, has around 25 hours on it. Cases are perfect, no welds or cracks. Assembled, just need to install your top end. Was used in a 1050 setup but you can use for 951.$700 + shipping.

    951 cases , cases are perfect with no welds or cracks $450 + shipping

    951 topend with cylinder and two std used oem pistons with around 30 hrs. $250 + shipping(sold)

    new oem oil injection pump 270500423. I know fits 98 gsxl and gtxl. May fit other models. $60 shipped (us)

    miller head with 1050 49cc domes $185 shipped (us)(sold)

    pair of 951 47cc domes for miller head $50 shipped (sold)

    solas concord 15/20 for 951. never been bent. I’ve had different 15/20 before and this is a pretty big prop. $130 shipped

    skat adjustable nozzle for a 951 oem pump. Includes one ring 85mm. one of the side holes has a helicoil in it. Works perfect $65 shipped

    98 mpem with key. Will fit xpl,gsxl $220 shipped (sold)


    3 oem 951 props that were done by impros. 920 bent to 13/18 , 818 bent to 13/19, 810 bent to 14/20.set up for 951 with coffman. all props are in perfect condition $85 each shipped

    2 oem 951 props stock , no nicks 810 and I believe it’s a 909, $60 each shipped(sold)

    solas sd-cd 15/23 new. I believe this prop was for a 97.5 gsxl $60 shipped

    oem 951 head, perfect condition $60 shipped

    oem 951 exhaust manifold $60 shipped

    oem 951 exhaust manifold with egt holes $60 shipped

    race pak with 2 probles. $175 shipped (1 more left)

    a pair of probles for racepak hottach 3 $40 shipped (sold)

    a set of rinaldi reeds, there are some tiny chips on the corners of a few petals, doesn’t affect anything as holes are completely covered. $100 shipped

    1 new miller 1050 piston 92.45 , coated with whatever mel used. Includes pin , piston and clip. $100 shipped

    oem head that was cut for flat top 1050 piston. A few nicks in one of the domes but still works. $60 shipped

    oem 951 starter $60 shipped

    oem 951 stator $70 shipped

    microtouch rev limiter for 98 951’s. I believe it will work for the 800’s too. $50 shipped

    rave spacers for 1050 if you don’t want to cut your rave valves. $40 shipped

    oem 951 rave valves. $70 shipped for the pair(sold)

    ľ spacer for 951 reeds. $30 shipped

    rinaldi reed spacers $40 shipped

    miller reed spacers $40 shipped

    proks air filter for stock 951 carbs $45 shipped

    oem 951 carbs, accelerator pump has been disabled, $135 shipped

    new oem exhaust hose(from waterbox to outlet) for xpl(98 or 99 and up if you bypassed resonator $40 shipped

    oem intake manifolds $30 a pair shipped

    951 pump, plastic complete with extra new wear ring .all you need is a prop. current wear ring is good but I have a new one I wil throw in for spare $150 shipped

    new oem 951 pump shaft $60 shipped

    951 vts, complete $140 shipped

    4 oem std 951 pistons $30 each shipped(sold)


    oem rotax rebuilt crank. purchased from ppg around 4 years ago but never used $300+shipping(s)old

    skat setback pump with extended driveshaft. came off of an rxx. using 951 nozzle modified so the stock bilge still works. I forgot what prop is in there but you will need a pipe to turn it.with a 1050 piped, I had it turning around 7500 in 100 degrees. has been converted to use oil. there are some nicks on the veins but not bad. if interested, I'll pull prop to take pics of veins.$650 + shipping


    miller intake manifold, rinaldi reeds(using miller petals), and rinaldi spacers. $300 shipped


    xpl rear hatch 130 shipped


    2 jetworks valve 1/4 blue , new style, excellent condition $30 each shipped

    fuel gauge and vts gauge for 98 xpl $40 each shipped

    fuel gauge and vts gauge for 99 xpl $40 each shipped

    I still have a lot of other 951 parts that I will post later or if you want something you don’t see, pm me
    Besides new parts, all other parts are from my personal ski’s so I know the condition of them .after owning 5 951’s, I’ve decided to switch over to 4 strokes and keep only one xpl and I only need so many backup parts. None of these parts have seen salt water. I can have pics by the weekend.


    Mike

    Last edited by seadoo1120; 04-09-2010 at 06:42 PM. Reason: update


  2. #2
    GPR114's Avatar
    Join Date
    Dec 2005
    Location
    West Palm Beach, FL
    Posts
    201

    Probes

    a pair of probles for racepak hottach 3 $40 shipped


    Are these individual or a joined pair?

    I have a bad probe and they are the individual probes. If this is the joined pair can I use it by itself on a twin setup?

    I'll take them if they are individual or I can use them as described.

  3. #3
    I'll take the Miller 1050 head, pm sent.

  4. #4
    liquidmilitia.com rxp127's Avatar
    Join Date
    Aug 2006
    Location
    SO*CAL
    Posts
    923
    +1
    1
    Pm sent. Ill buy the 0em 951 ex man.

  5. #5
    Faster Than a Snail on a Log mongorunner's Avatar
    Join Date
    Jun 2007
    Location
    North of Amarillo TX
    Posts
    741
    when you say complete 1050 are you talking RAVES and carbs?

  6. #6

    Join Date
    May 2005
    Location
    so cal
    Posts
    265
    no it's the motor only. I think I phrased it wrong.

  7. #7

    Join Date
    Apr 2005
    Location
    Eureka, MO
    Posts
    404
    +1
    1
    I sent you a PM concerning the race pak with 2 probes.

    Dan (drb)

  8. #8
    Faster Than a Snail on a Log mongorunner's Avatar
    Join Date
    Jun 2007
    Location
    North of Amarillo TX
    Posts
    741
    Quote Originally Posted by seadoo1120 View Post
    no it's the motor only. I think I phrased it wrong.

    just clearing up the air..


    can i get pictures of that skat nozzle??

  9. #9
    Seadookilla
    Join Date
    Feb 2007
    Location
    Eureka, MO
    Posts
    114
    +1
    2
    Dibs on the Miller 1050 Block, PM sent

  10. #10
    MILLER PHASE 3 1050's Avatar
    Join Date
    Sep 2006
    Location
    909\951
    Posts
    708
    +1
    3
    sent pm on mpem 99

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS Lots of 951/1050 parts for sale
    By codybrown in forum Sea Doo Classifieds
    Replies: 6
    Last Post: 11-21-2009, 09:39 PM
  2. FS Seadoo 951 motor & parts
    By water worx in forum Sea Doo Classifieds
    Replies: 16
    Last Post: 07-13-2009, 10:12 PM
  3. 2000 Sea Doo XP 951 - FULL PART OUT!
    By seatsR4toilets in forum Sea Doo Classifieds
    Replies: 6
    Last Post: 02-04-2009, 11:04 AM
  4. 96XP 1050 parts for sale
    By XPSteve in forum Sea Doo Classifieds
    Replies: 5
    Last Post: 01-14-2009, 07:58 PM
  5. WTB: POLARIS SL 1050 Parts
    By cubsfan2516 in forum Polaris Classifieds
    Replies: 0
    Last Post: 08-25-2008, 08:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •