Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1

    Join Date
    Jan 2007
    Location
    Virginia
    Posts
    277

    Wet Wolf Adjust-A-Thrust

    Ive looked at all the old posts on this part and there doesnt seem to be anyone currently running it and posting feedback or results. Anyone out there currently using this on a 1300?


  2. #2

    Join Date
    Apr 2006
    Location
    panama city beach 'fl
    Posts
    1,846
    +1
    9

    Cool

    bruce said it works on stock to mild mod ski,my question is what rpm are you running ? your ski should be little bit faster (in my opinion) something is missing

    cd

  3. #3

    Join Date
    Jan 2007
    Location
    Virginia
    Posts
    277
    Ill Check on Saturday when I go out on the RPM's. The 67 is from last years gas - not on the smoothest water. I re-angled the plate and will see what happens Saturday.

    But if my boat did 65 stock and now does over 67 I think that might be ok because I dont have the stock grate on(which is the fastest) and the Free Flow takes away top speed. My other mods dont do much for top speed- the Dplate, holeshot kit, and pro-tec nozzle. The boat did see 69.2 with Jims plate, nozzle and stock grate. So I think the Grate, and Free Flow brought it back down. We will see Saturday - Im throwing a flo-rite into the seat to get some more air in - maybe that will help.

    I dont need to adjsut my high speed setting on the EFI for the new prop or Free Flow right?

  4. #4
    flyboy's Avatar
    Join Date
    Nov 2005
    Location
    Destin, FL
    Posts
    1,585
    is that a depitched DF14/20?

    that speed is low. we did 67.5 on a stock ski about 2 months ago.

  5. #5

    Join Date
    Jan 2007
    Location
    Virginia
    Posts
    277
    Quote Originally Posted by flyboy View Post
    is that a depitched DF14/20?

    that speed is low. we did 67.5 on a stock ski about 2 months ago.

    No it is a Skat Trak.

    67.5 with no mods?

  6. #6

    Join Date
    Apr 2006
    Location
    panama city beach 'fl
    Posts
    1,846
    +1
    9

    Cool

    Quote Originally Posted by jcorallo View Post
    Ill Check on Saturday when I go out on the RPM's. The 67 is from last years gas - not on the smoothest water. I re-angled the plate and will see what happens Saturday.

    But if my boat did 65 stock and now does over 67 I think that might be ok because I dont have the stock grate on(which is the fastest) and the Free Flow takes away top speed. My other mods dont do much for top speed- the Dplate, holeshot kit, and pro-tec nozzle. The boat did see 69.2 with Jims plate, nozzle and stock grate. So I think the Grate, and Free Flow brought it back down. We will see Saturday - Im throwing a flo-rite into the seat to get some more air in - maybe that will help.

    I dont need to adjsut my high speed setting on the EFI for the new prop or Free Flow right?

    bud don't go back to stock grate,you'll bust you ass(or worst) check and see if new nozzle is center when neutral and set high speed setting to 1

    cd

  7. #7

    Join Date
    Jan 2007
    Location
    Virginia
    Posts
    277
    Quote Originally Posted by chip View Post
    bud don't go back to stock grate,you'll bust you ass(or worst) check and see if new nozzle is center when neutral and set high speed setting to 1

    cd

    Dont Worry I would never - the stock grate is downstairs in the basement.
    High Speed Setting is at 1.

    Ill check Nozzle - shoudl be good - ive checked in past. Pump shoe is nice and recessed and even on both sides and pushed back. Ride plate is pushed up to pump shoe also. Holes are filled.

    Do you want your grate as far foward or back as you can?

    I think raising the plate in the back will add more speed - ill see Saturday.

  8. #8

    Join Date
    Apr 2006
    Location
    panama city beach 'fl
    Posts
    1,846
    +1
    9

    Cool

    anyways back to your question,with your mods should offer some speed gain if prop is low enough that way you can tweek rpm's and 4 deg will help with lifting nose but only in calm water.what do you have plate set at? best would be to read phil's posting


    http://www.greenhulk.net/forums/showthread.php?t=8829


    cd

  9. #9
    flyboy's Avatar
    Join Date
    Nov 2005
    Location
    Destin, FL
    Posts
    1,585
    Quote Originally Posted by jcorallo View Post
    67.5 with no mods?
    Bone Stock half tank gas

  10. #10

    Join Date
    Jan 2007
    Location
    Virginia
    Posts
    277
    Quote Originally Posted by flyboy View Post
    Bone Stock half tank gas
    Damn thats a hell of a boat.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS - Parts ZXi STX Wet Wolf Adjust A Thrust
    By jdakrt in forum Kawasaki Classifieds
    Replies: 0
    Last Post: 10-21-2013, 08:09 AM
  2. WTB wtb 140mm pump wedge 96 xp and a wet wolf adjust a thrust
    By middaughm in forum Sea Doo 2 Stroke Skis
    Replies: 1
    Last Post: 02-21-2012, 02:54 PM
  3. Wet Wolf Ajust-a-thrust
    By seaobin in forum Polaris Open Discussion
    Replies: 34
    Last Post: 11-23-2010, 11:04 PM
  4. Wet Wolf Adjust a Thrust
    By BAYOU FZR in forum 4-Tec Performance
    Replies: 3
    Last Post: 05-21-2009, 10:29 AM
  5. WET FOLD Adjust-A-Thrust Pump Cone
    By Turbo in forum Yamaha PWC Performance (2-stroke)
    Replies: 0
    Last Post: 05-17-2009, 03:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •