Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 31
  1. #1
    Hydrotoys's Avatar
    Join Date
    Jul 2005
    Location
    Mesa, AZ
    Posts
    16,712
    +1
    85

    SHO-GPR parts needed

    I'd like to get the help of all the sho-gpr guys and start some FAQ's just like we've done for the GPRXP's.

    Check out this gprxp link, for ideas, and let's get the ball rolling.
    Part numbers, links, prices, etc make it all easier...
    http://www.greenhulk.net/forums/showthread.php?t=44888

    Some folks have made comments on how "easy" it is. I've seen what you guys have had to do, so I know it's only easy after you finish.

    With your help, it can get a lot better for those that follow.


  2. #2
    800AMSOIL4U's Avatar
    Join Date
    Aug 2006
    Location
    Morgan Hill, CA
    Posts
    5,024
    +1
    132
    Great idea.

  3. #3
    It's not the destination, it's the journey!! Rip'nTear SHO's Avatar
    Join Date
    Apr 2008
    Location
    Ft. Lauderdale
    Posts
    4,573
    kk...we'll get to working on a list for u guys.....time to light a fire under Eric's azz...

  4. #4

    Join Date
    Aug 2008
    Location
    Southern Florida
    Posts
    5,589
    +1
    345
    I didn't think Hydrotoys would mind if I copied his GPRXP list and modded it, so thanks to Mark.

    Feel free to suggest any addiitions. I can or Hydro can update it for us.

    Depending upon how hard core you are with building a GPR-SHO conversion dictate's the size of the list. I did not go through painting the inside or outside of the hull, but other than that, it's a FAIRLY easy build.

    Some GPR-SHO conversion build links, that I have found:
    SHOdude: http://www.greenhulk.net/forums/showthread.php?t=84885
    Bruce: http://www.greenhulk.net/forums/showthread.php?t=60126
    nm2769: http://www.greenhulk.net/forums/showthread.php?t=78958
    Pistonwash: http://www.greenhulk.net/forums/showthread.php?t=82521



    SHO Parts:
    • Complete Engine and wiring harness.
    • Main wiring harness.
    • Handlebar wiring harness.
    • Gauge and wiring harness.
    • Speedo and internal wiring.
    • Battery and cables.
    • Temp sensor/buzzer
    • motor mount shims.
    • All the hoses.
    • Throttle Cable
    • Fuel Pump
    • FXSHO pump
    Gpr Parts:
    • GP12/13R Hull/Topdeck/Steering/Body panels/seat.
    • Speedo and hull feedthru.
    • Entire pump tunnel. (2005 pump system is preferable) I used my FXSHO pump.
    • 2" pump spacer and hardware, if necessary.
    • 2" extension on steering and trim, if necessary. Got mine from Osidebill.
    • EFI Gas tank & vent system, 1300 fuel fill hose
    Aftermarket:
    • 2 bar grate. Either 800 or 1200.
    • Stock, R&D or Riva rideplate, modded for 1300r use.
    • I used a modded 1200 waterbox. I talked to TDR about a waterbox usiing the Model MC-1, but never came to fruition.
    • Riva 1300r free flow hose.
    • Pump Tunnel re-inforcement
    • 2 Jetworks pressure relief valves. .
    Conversion parts:
    • FXSHO exhaust manifold piece modded by Bruce at Riva.
    While this list isn't perfect, you should be pretty close if you have all of these parts for the basic GPR-SHO conversion. Good luck and let me know if I can help.

  5. #5
    Hydrotoys's Avatar
    Join Date
    Jul 2005
    Location
    Mesa, AZ
    Posts
    16,712
    +1
    85
    I think Bruce will need to clarify if the exhaust modification is something he is willing to do on a regular basis. If not, then we should scratch that.

    About the waterbox. I'd highlight that there is no solution found. To make this work, for the masses, somebody is going to have to design and sell one, for a reasonable price, or there will be a bunch of sunken skis with poorly made waterboxes.

  6. #6
    jtskir15f's Avatar
    Join Date
    Oct 2007
    Location
    Dubuque, IA
    Posts
    958
    Get on it Mark You were the brains behind the MC-1 right?

  7. #7
    Hydrotoys's Avatar
    Join Date
    Jul 2005
    Location
    Mesa, AZ
    Posts
    16,712
    +1
    85
    I can't do anything until I get the engine in the ski, and that won't happen for me for a while.

  8. #8

    Join Date
    Aug 2008
    Location
    Southern Florida
    Posts
    5,589
    +1
    345
    Quote Originally Posted by jtskir15f View Post
    Get on it Mark You were the brains behind the MC-1 right?
    Yes he was. Mark, Jerry and a few others told me to give TDR a call. Unfortunately, they had a 2-3 week backlog and I let it go and went with the 1200 WB. Might be something I'd like to do in the future.

  9. #9
    Hydrotoys's Avatar
    Join Date
    Jul 2005
    Location
    Mesa, AZ
    Posts
    16,712
    +1
    85
    When you get a chance, if you send your 12r box into him, and have him map it out it won't benefit you, but it will help everyone else.

  10. #10

    Join Date
    Aug 2008
    Location
    Southern Florida
    Posts
    5,589
    +1
    345
    Quote Originally Posted by Hydrotoys View Post
    When you get a chance, if you send your 12r box into him, and have him map it out it won't benefit you, but it will help everyone else.
    Why wouldn't it benefit me? I want to try that WB.

    Ah hell, straight pipe

Page 1 of 4 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB Need some GPR Parts
    By Yellow93 in forum Yamaha Classifieds
    Replies: 1
    Last Post: 12-01-2010, 06:14 PM
  2. Replies: 20
    Last Post: 08-20-2010, 04:07 PM
  3. WTB Need some GPR parts!
    By Yellow93 in forum Yamaha Classifieds
    Replies: 3
    Last Post: 04-13-2010, 09:33 AM
  4. WTB GPR parts needed
    By henn in forum Yamaha Classifieds
    Replies: 3
    Last Post: 11-03-2009, 03:29 PM
  5. GPR DOWN! Need an online diagnosis and some parts :(
    By ProXR 440 in forum Yamaha PWC Performance (2-stroke)
    Replies: 44
    Last Post: 06-30-2009, 01:57 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •