Results 1 to 7 of 7
  1. #1
    shhr's Avatar
    Join Date
    May 2005
    Location
    Springfield,TN
    Posts
    2,546
    +1
    311

    FZS air intake size

    What is the size of the SC opening on the FZ is it 3" or 4" I plan on making my own air intake as I have a hard time paying 250 for the Riva one

    my plan is to get a 90 from silicone intakes then a 2-3 ft section of Kanaflex hose with a SS filter just need to make sure I get the right size


  2. #2
    SHOTIME's Avatar
    Join Date
    Aug 2008
    Location
    Englewood, FL.
    Posts
    136
    not sure what the size is, but you can use the stock hose coming off the S/C and get a 90 degree aluminum hard pipe to run to the front of the ski.
    i think it is a 3" pipe but not sure w/out measuring.

  3. #3
    shhr's Avatar
    Join Date
    May 2005
    Location
    Springfield,TN
    Posts
    2,546
    +1
    311
    not sure what the size is, but you can use the stock hose coming off the S/C and get a 90 degree aluminum hard pipe to run to the front of the ski.
    i think it is a 3" pipe but not sure w/out measuring.
    good idea I may try that

  4. #4
    SHOTIME's Avatar
    Join Date
    Aug 2008
    Location
    Englewood, FL.
    Posts
    136
    Quote Originally Posted by shhr View Post
    good idea I may try that
    it works well, i also used the 3" air filter w/ the splash guard from silicone intakes for the filter.

  5. #5

    Join Date
    Feb 2009
    Location
    Pensacola Fl
    Posts
    235
    +1
    1
    I went with R&D'S power plenum. It is over $100 cheaper than Rivas.

  6. #6
    shhr's Avatar
    Join Date
    May 2005
    Location
    Springfield,TN
    Posts
    2,546
    +1
    311
    ok here is what I plan on using for my air intake all for around 80 bucks not very fancy but I think it will work should get installed tomorrow

    Click image for larger version. 

Name:	photo (4).jpg 
Views:	57 
Size:	145.1 KB 
ID:	135547

  7. #7
    I would start with 4" that tapered down to 3"

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Fzs Air Intake ducts
    By Dobie in forum Yamaha PWC Performance (4-stroke)
    Replies: 7
    Last Post: 06-29-2016, 08:57 PM
  2. Pulling the Foam on the FZ Air intake
    By Jack B in forum Yamaha PWC Performance (4-stroke)
    Replies: 5
    Last Post: 03-21-2010, 07:11 PM
  3. Couple Questions on FZR/FZS Ride Plates, Sponsons, and Air Intakes
    By ercBOOSTED in forum Yamaha PWC Performance (4-stroke)
    Replies: 6
    Last Post: 11-24-2009, 07:47 AM
  4. Size of Air Intake On Throttle Body - 155 N/A
    By spd5535 in forum Sea Doo Sport Boats
    Replies: 6
    Last Post: 02-17-2008, 09:55 AM
  5. Size of Air Intake On Throttle Body - 155 N/A
    By spd5535 in forum 4-Tec Performance
    Replies: 0
    Last Post: 02-15-2008, 04:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •