Results 1 to 9 of 9
  1. #1

    P-X solas repitch?

    Hey guy I currently have a solas 15/22r prop on my x-p. I added a 2rude now. Should I repitch it or the stock one?


  2. #2

  3. #3
    Golden Jet red fox's Avatar
    Join Date
    Dec 2008
    Location
    DiJeddah
    Posts
    322
    Quote Originally Posted by BIGWORM View Post
    Hey guy I currently have a solas 15/22r prop on my x-p. I added a 2rude now. Should I repitch it or the stock one?
    i think you have to check the RPM first ....

  4. #4
    It hits the rev limiter. I just don't know weather to repitch the solas or the stock impellar???

  5. #5
    Having Fun jp1300r's Avatar
    Join Date
    Sep 2005
    Location
    Florida
    Posts
    5,334
    +1
    261
    What size nozzle are you running? With stock X ecu I have been running a true 14/23 Solas and a 81mm nozzle. Usually the out of box props are not what they say they are. Meaning a 15/22 could be a 14/21 and all the blades are not the same either.

  6. #6
    Quote Originally Posted by jp1300r View Post
    What size nozzle are you running? With stock X ecu I have been running a true 14/23 Solas and a 81mm nozzle. Usually the out of box props are not what they say they are. Meaning a 15/22 could be a 14/21 and all the blades are not the same either.
    Can mine be repiched to a 14/21? I have a size 82 ring in right now???

  7. #7
    Having Fun jp1300r's Avatar
    Join Date
    Sep 2005
    Location
    Florida
    Posts
    5,334
    +1
    261
    Quote Originally Posted by BIGWORM View Post
    Can mine be repiched to a 14/21? I have a size 82 ring in right now???
    I started with a 15/20. Its been a 15/20 to a 14/25 and back again. I think your set up is close to mine. You're going to need about a 14/23 like I have to keep off the limiter. With a 83 ring I turn about 8120-60 depending on conditions. With an 81 ring I turn 8060 to 8120 depending on the conditions.

  8. #8
    Quote Originally Posted by jp1300r View Post
    I started with a 15/20. Its been a 15/20 to a 14/25 and back again. I think your set up is close to mine. You're going to need about a 14/23 like I have to keep off the limiter. With a 83 ring I turn about 8120-60 depending on conditions. With an 81 ring I turn 8060 to 8120 depending on the conditions.
    Where can i send it to be repitched????

  9. #9
    Having Fun jp1300r's Avatar
    Join Date
    Sep 2005
    Location
    Florida
    Posts
    5,334
    +1
    261
    Duke on here did mine. You can PM him. He will pitch it and send it back quickly. Alot of people are using Erik SpeedFreaks, also. If you can find someone close to you the better. Duke and I went through alot to find a good pitch that gave accelleration and top speed. A stock ECU really limits you because of the rev limiter at 8200 on the X. You need to be at 8080-8120 for best performance. We did most of the work last summer with a 83mm nozzle and I just use a 82-81mm nozzle rings as it cools down.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. solas prop compared to stock repitched
    By nitro rxp in forum 4-Tec Performance
    Replies: 23
    Last Post: 12-17-2007, 10:31 AM
  2. Where to go to get Solas repitched?
    By dongee in forum Yamaha How To & FAQs
    Replies: 1
    Last Post: 07-16-2007, 07:04 PM
  3. Repitching solas prop for more RPM
    By nitro rxp in forum 4-Tec Performance
    Replies: 4
    Last Post: 07-30-2005, 09:01 AM
  4. repitch solas ?
    By nitro rxp in forum 4-Tec Performance
    Replies: 9
    Last Post: 07-17-2005, 10:22 AM
  5. Repitch Solas or the new Solas from Riva
    By Therock in forum 4-Tec Performance
    Replies: 4
    Last Post: 06-23-2005, 08:51 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •