Results 1 to 4 of 4
  1. #1
    tiddy2005's Avatar
    Join Date
    Apr 2009
    Location
    Olathe, KS
    Posts
    52
    +1
    1

    04 RXP Reverse Help

    I purchase a 04 RXP a while ago now.. the reverse didn't work.. It would only push the nozzle half way down and wouldn't pull it back up.. I watched the cable while I had another guy pull it back and forth.. It looked like the cable was binding up.. So i got a new cable and..... same issue! The whole cable moves and not the inside of the cable.. Is it the POS plastic nut but that holds the cable in place back at the "pump wall"? After pulling the pump and nozzle off 3 times.. I figured I would turn to the pros of Green Hulk..

    Any ideas?

    Thanks guys!

    Chris


  2. #2
    tiddy2005's Avatar
    Join Date
    Apr 2009
    Location
    Olathe, KS
    Posts
    52
    +1
    1

    Bumpin up

    4 help!!

    Thanks

    Quote Originally Posted by tiddy2005 View Post
    I purchase a 04 RXP a while ago now.. the reverse didn't work.. It would only push the nozzle half way down and wouldn't pull it back up.. I watched the cable while I had another guy pull it back and forth.. It looked like the cable was binding up.. So i got a new cable and..... same issue! The whole cable moves and not the inside of the cable.. Is it the POS plastic nut but that holds the cable in place back at the "pump wall"? After pulling the pump and nozzle off 3 times.. I figured I would turn to the pros of Green Hulk..

    Any ideas?

    Thanks guys!

    Chris

  3. #3
    camar0's Avatar
    Join Date
    Apr 2007
    Location
    Sunshine
    Posts
    787
    the cable should move back and forth even without the nozzle attached

    if this is not moving then it is something else restricting movement

    the attachment is simple at the reverse handle and out the hull so maybe just bad cables?

  4. #4
    tiddy2005's Avatar
    Join Date
    Apr 2009
    Location
    Olathe, KS
    Posts
    52
    +1
    1
    Quote Originally Posted by camar0 View Post
    the cable should move back and forth even without the nozzle attached

    if this is not moving then it is something else restricting movement

    the attachment is simple at the reverse handle and out the hull so maybe just bad cables?
    I have routed it a few different ways, but the original way seems to work best. I will play around with it a little more..

    Thanks for the input!

    Chris

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS 04 rxp reverse housing
    By rxp127 in forum Sea Doo Classifieds
    Replies: 2
    Last Post: 09-24-2009, 11:08 PM
  2. 04 RXP Stator HELP PLEASE!!!!
    By ScottieB in forum 4-Tec Performance
    Replies: 2
    Last Post: 06-30-2009, 12:22 PM
  3. 04 rxp reverse cable
    By RXPRacer513 in forum Sea Doo Classifieds
    Replies: 2
    Last Post: 05-26-2009, 11:28 PM
  4. Need to update 04 rxp engine."help"
    By Turbo Todd in forum Sea Doo Open Discussion
    Replies: 12
    Last Post: 11-25-2008, 10:40 PM
  5. 04 RXP need help
    By seadawg in forum 4-Tec Performance
    Replies: 6
    Last Post: 04-06-2008, 08:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •