Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 22
  1. #1

    Join Date
    Oct 2008
    Location
    Lake havasu city
    Posts
    318

    Polaris Superstock pro785

    Anybody have any interest in this boat. I need to raise some cash for a project.... and bills. This is a great boat and has won many titles and races. Its is super crazy out of the hole. If you know this boat its a dave delaghter full port cases and cyls. The engine is super fresh and looks great in the bores. Since I have owned it I only put about 1.5 hours on it. Mostly for tuning and race gas is a little pricey. I have put new MSD wires on it. Had pipes pressure tested and thouroghly gone over repaired where required. It has Total loss and gas valves... red top 46mm side drafts. I have the tube to do the exhaust straight out the back and has the waterbox in it right now. (to protect engine) It also has the expensive protach system capable of EGT. (there is no egt harness though its an option) If you want it delivered I recommend USHIP.com Probably would cost about 2-300.00 this is a real nice boat Its a full Superstocker that I just abbout go tuned in perfect it is capable of a few more rpms but last run was in the 79 area on pet tach. the superstock 3,100

    I also have a pro785 engine with 30-40 hours for sale. All bores look great and you feel no scoring. The bores are good. Its complete top to bottom Minus starter and head. (has rubber dampened coupler on it but I will send a stock coupler 775. plus shiping. I already have a nice crate.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSCF0012.JPG 
Views:	52 
Size:	338.8 KB 
ID:	135165   Click image for larger version. 

Name:	DSCF0011.JPG 
Views:	41 
Size:	329.8 KB 
ID:	135166   Click image for larger version. 

Name:	DSCF0010.JPG 
Views:	52 
Size:	330.1 KB 
ID:	135167   Click image for larger version. 

Name:	DSCF0009.JPG 
Views:	63 
Size:	320.2 KB 
ID:	135168   Click image for larger version. 

Name:	DSCF0008.JPG 
Views:	61 
Size:	327.3 KB 
ID:	135169  
    Last edited by chopper901; 06-05-2009 at 01:04 PM. Reason: shipping


  2. #2

    Join Date
    Oct 2008
    Location
    Lake havasu city
    Posts
    318
    All the bores and engine pics are for the crated engine not the Superstock
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSCF0007.JPG 
Views:	54 
Size:	334.7 KB 
ID:	135171   Click image for larger version. 

Name:	DSCF0006.JPG 
Views:	60 
Size:	347.0 KB 
ID:	135172   Click image for larger version. 

Name:	DSCF0005.JPG 
Views:	55 
Size:	328.9 KB 
ID:	135173  

  3. #3

    Join Date
    Oct 2008
    Location
    Lake havasu city
    Posts
    318
    more pics... The scratch on side looks bad in pic but really the boat cleans up real well. The carbon fiber hood has some stress cracks but is fine and looks good it also has a new Gel Battery
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	DSCF0004.JPG 
Views:	62 
Size:	326.2 KB 
ID:	135174   Click image for larger version. 

Name:	DSCF0005.JPG 
Views:	52 
Size:	328.9 KB 
ID:	135175   Click image for larger version. 

Name:	DSCF0003.JPG 
Views:	56 
Size:	313.0 KB 
ID:	135176  

  4. #4

    Join Date
    Oct 2008
    Location
    Lake havasu city
    Posts
    318

    pro's

    The reason it this one I chose is because its the only finished project I have! I have three other pro's projects going

  5. #5

    Join Date
    Oct 2008
    Location
    Lake havasu city
    Posts
    318

    Interest

    If there isnt anyone interested Ill talk if anyone wants Hot seat Gas valves 700, Hot seat pipes (Ill neet to get a pic on here of the pipes) 675 +actual shipping. Msd Ignition/total loss 625. Prices will be firm...add 10 for shipping for small parts hot seat two dot head 170.00. Carbon hood 275. + actual shiping
    Last edited by chopper901; 06-05-2009 at 01:05 PM. Reason: shipping

  6. #6

    Join Date
    Apr 2009
    Location
    winston salem, nc
    Posts
    104
    is the engine stock? i am trying to buy a pro down here in nc and would be interested in a stock engine for a spare if i doto buy the boat.

    thanks

  7. #7

    Join Date
    Oct 2008
    Location
    Lake havasu city
    Posts
    318

    engine...

    The spare engine is a full stocker.... Thats why I bought it.... Its cheaper than buying the parts separate. cyls cost about 200 ea to replate pistons and rings are about 115 per cyl... Not to mention stator and Crankshaft stuff is high dollar. I have a nice crate for it as well. Spares for the 785 I think will be important... wish I could keep it....

  8. #8
    How much for the stock engine shipped to 53007 zip?

  9. #9

    Join Date
    Oct 2008
    Location
    Lake havasu city
    Posts
    318

    engine shipped

    $875. and if shipping is less you get a credit if its more I eat it.

  10. #10
    is the motor gone

Page 1 of 3 1 2 3 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. WTB Limited or Superstock Pro 785 Polaris
    By scottie mac in forum Polaris Classifieds
    Replies: 10
    Last Post: 04-21-2016, 10:22 PM
  2. Polaris CDI timing curves, sleeper, limited, superstock, stock
    By CrazyA in forum Polaris Tech Tips and Info
    Replies: 0
    Last Post: 10-19-2014, 06:35 PM
  3. Polaris SLT780
    By KirkF350 in forum Yamaha Open Discussion
    Replies: 14
    Last Post: 06-26-2006, 08:24 PM
  4. WHO SELLS PERFORMANCE PARTS FOR POLARIS 12OO?
    By peteshauling in forum Sea Doo Open Discussion
    Replies: 8
    Last Post: 01-06-2006, 05:43 AM
  5. Polaris SLT780
    By racerrob333 in forum Yamaha How To & FAQs
    Replies: 6
    Last Post: 01-01-1970, 04:07 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •