Results 1 to 4 of 4
  1. #1
    Live Fast wave15stx's Avatar
    Join Date
    May 2007
    Location
    new jersey
    Posts
    2,214
    +1
    32

    is my speed good for my mods...fx sho

    on my 2008 sho i have the c1 wheel,free flo exhaust,air intake,boost controller,intake grate,bov and 13/23 prop with a slight current i ran a best of 70.2 mostly 69mph range..it feels great midrange and out of the line, could use some more topend i noticed on the stock tach the rpms where in the 7800 range and on glass conditions earlier today seems i was slightly bouncing off the limiter.the stock ride plate def needs some work as far as how it seals up to the hull and intake grate, needs to be sealed up but im thinking a worked r&d plate might be next and maybe a bigger prop 13/24?is there any tweaking with the boost controller?also should the bov be set a certain way?


  2. #2
    SHOBiz's Avatar
    Join Date
    Jul 2008
    Location
    Wylie, Texas
    Posts
    3,577
    Yep, that is a fair speed .
    To go faster for now: a 13/24(min) Impeller, C3, BOV, Rideplate (probably in this order also) then think about getting an Intercooler next.

    But, first get a tach from Jerrys store so you can know exactly what the rpm's are.

  3. #3
    Live Fast wave15stx's Avatar
    Join Date
    May 2007
    Location
    new jersey
    Posts
    2,214
    +1
    32
    Quote Originally Posted by SHOBiz View Post
    Yep, that is a fair speed .
    To go faster for now: a 13/24(min) Impeller, C3, BOV, Rideplate (probably in this order also) then think about getting an Intercooler next.

    But, first get a tach from Jerrys store so you can know exactly what the rpm's are.
    yea im thinking next year for the c3 wheel i just did the c1 wheel so id like to get the most out of the ski with my current setup

  4. #4
    Live Fast wave15stx's Avatar
    Join Date
    May 2007
    Location
    new jersey
    Posts
    2,214
    +1
    32
    Quote Originally Posted by SHOBiz View Post
    Yep, that is a fair speed .
    To go faster for now: a 13/24(min) Impeller, C3, BOV, Rideplate (probably in this order also) then think about getting an Intercooler next.

    But, first get a tach from Jerrys store so you can know exactly what the rpm's are.
    u think a 13/24 is to much to pull with my mods?

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 1670 RPM at idle for my 2009 FX-SHO stage 3, is it too low?
    By SOV in forum Yamaha PWC Performance (4-stroke)
    Replies: 4
    Last Post: 09-15-2016, 03:51 AM
  2. My 2009 FX SHO is going into Limp Mod Randomly on Start=up?
    By EvilEvoIX in forum Yamaha PWC Performance (4-stroke)
    Replies: 21
    Last Post: 02-26-2014, 04:02 PM
  3. Replies: 7
    Last Post: 07-11-2013, 06:33 PM
  4. is this prop good for my ski/setup
    By Bone1050 in forum Polaris Open Discussion
    Replies: 4
    Last Post: 04-18-2008, 08:04 PM
  5. Is 67.6mph good for my setup?
    By orion in forum Yamaha PWC Performance (2-stroke)
    Replies: 11
    Last Post: 04-25-2007, 01:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •