Results 1 to 6 of 6
  1. #1
    Hydrotoys's Avatar
    Join Date
    Jul 2005
    Location
    Mesa, AZ
    Posts
    16,712
    +1
    85

    Talon Impellor Cones

    Interesting that we are on the subject of Impellor cones today. I've been using an old RPM Racing Talon Impellor cone for the longest time. Except, after switching to a dynafly they are not staying on under the lip anymore.

    This isn't just one prop or one talon, this is a few different ones of each. So, if you have an 05 pump, dynafly, and a talon impellor cone, I'd advice you crawl under your ski, and take a look. You might find your talon impellor cone up around the intake grate. It won't vibrate like the aluminum ones either.

    It works fine on the older Solas and Skat props... I've never lost one.


  2. #2
    GPRPITMAN's Avatar
    Join Date
    Feb 2006
    Location
    capecoral fla
    Posts
    880
    Mark I just put a bead of right stuff around the head of the cone then it stays snug and easy enough to remove just zip it with a wire wheel

  3. #3
    YudLuz2's Avatar
    Join Date
    Jun 2005
    Location
    Flowood MS
    Posts
    1,646
    +1
    110
    I had the cones backing out of the Dynafly too. Just
    a touch of glue on them and they stay. Just a light tap
    and they come right back out if needed.

  4. #4
    Hydrotoys's Avatar
    Join Date
    Jul 2005
    Location
    Mesa, AZ
    Posts
    16,712
    +1
    85
    These talon cones are a UHB plastic mixture. I'm unsure anything will hold it in place.

    I'll give it a shot later. I think Ted is going to make up another run of talons shortly. I'm going to get a bigger lip for the dynaflys.

  5. #5
    GPRPITMAN's Avatar
    Join Date
    Feb 2006
    Location
    capecoral fla
    Posts
    880
    we made are own nose cone out of the r(right stuff) and it stayed together so there is no problem that this will hold and stay together

  6. #6
    Moderator RX951's Avatar
    Join Date
    Apr 2005
    Location
    League City, Texas
    Posts
    16,066
    +1
    23
    I put a few drops of blue loctite on my shaft and it has stayed so far.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Lucky 13 pump cone vs. Solas 13/20 Impellor
    By LugNutLS1 in forum Yamaha PWC Performance (4-stroke)
    Replies: 65
    Last Post: 03-08-2017, 02:44 PM
  2. Impellor cone?????
    By LETHAL RX7 in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 07-01-2008, 07:46 PM
  3. Running solas pitched impellor with stock rubber cone
    By bling bling in forum 4-Tec Performance
    Replies: 24
    Last Post: 06-29-2005, 03:54 PM
  4. R&D RXP Pump Cone Spacer Kit
    By Jarrett in forum 4-Tec Performance
    Replies: 3
    Last Post: 06-29-2005, 03:14 PM
  5. pump cone grease
    By nitro rxp in forum 4-Tec Performance
    Replies: 1
    Last Post: 06-22-2005, 05:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •