Results 1 to 8 of 8
  1. #1

    Join Date
    Jan 2007
    Location
    Milwaukee, Wisconsin, United States
    Posts
    773
    +1
    1

    GPR to FZR Comapatability?

    Any of the handeling mods carry over ??

    UMI?

    Sponsons?

    Ride Plates

    Props with remachined hubs?

    drop nozzle

    and what ever else you guys may know..

    thx, KG


  2. #2

    Join Date
    Aug 2008
    Location
    Southern Florida
    Posts
    5,589
    +1
    345
    I doubt any of it is compatible.

  3. #3
    maybe the gas cap, or the drain plugs

  4. #4
    hitman's Avatar
    Join Date
    Aug 2006
    Location
    Ft. Lauderdale, FL
    Posts
    4,328
    +1
    12
    Quote Originally Posted by camaudio View Post
    maybe the gas cap, or the drain plugs

  5. #5
    SHOBiz's Avatar
    Join Date
    Jul 2008
    Location
    Wylie, Texas
    Posts
    3,577
    Quote Originally Posted by SHOdude View Post
    I doubt any of it is compatible.

    With enough cuttin, drillin, grindin, and hammerin anything can fit

  6. #6
    mjh3ides's Avatar
    Join Date
    Jul 2007
    Location
    Jupiter, Florida
    Posts
    6,795
    +1
    2,010
    Quote Originally Posted by gpr717 View Post
    Any of the handeling mods carry over ??

    UMI? ??

    Sponsons? On the Rivas, the blades are the same, but the backing plate has the holes in a different place, so they might be made to fit.

    Ride Plates ??

    Props with remachined hubs? Yes, remachining will work, but at
    $200 a pop it might be better to sell the GPR props & buy new ones. Solas will have a DF for the larger shaft soon.

    drop nozzle? Probably. I'm not too familiar with how the linkages work on the drop nozzle, but the pump assemblies are similar.

    and what ever else you guys may know..

    thx, KG
    If you remove the reverse, the exit nozzles from a GPR will also fit.

  7. #7

    Join Date
    Jan 2007
    Location
    Milwaukee, Wisconsin, United States
    Posts
    773
    +1
    1

    answer

    yup true that ...lol

    Quote Originally Posted by SHOBiz View Post
    With enough cuttin, drillin, grindin, and hammerin anything can fit

  8. #8
    flyboy's Avatar
    Join Date
    Nov 2005
    Location
    Destin, FL
    Posts
    1,585
    the key.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. SOLD GPR to 1.8CC SHO engine FZR electrical harness conversion
    By torquenut3 in forum Yamaha 4 Stroke Skis
    Replies: 0
    Last Post: 04-19-2015, 07:18 PM
  2. magnum GPR on fzr
    By microforest in forum Yamaha PWC Performance (4-stroke)
    Replies: 2
    Last Post: 04-09-2009, 02:00 AM
  3. What causes the GPR to rock?
    By jpa1300 in forum Yamaha PWC Performance (2-stroke)
    Replies: 14
    Last Post: 06-25-2007, 05:12 PM
  4. exaust intake / 1200 gpr to cyl
    By Raider Kevin in forum Yamaha How To & FAQs
    Replies: 0
    Last Post: 04-07-2007, 04:26 PM
  5. Tripple piped GPR to RXP
    By Insanediego Joe in forum Sea Doo Open Discussion
    Replies: 13
    Last Post: 05-14-2006, 12:09 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •