Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1
    philip_gpr's Avatar
    Join Date
    Dec 2005
    Location
    Canada
    Posts
    2,724
    +1
    3

    F/S Pump Wedges 2, 1, -1, -2 degree

    These wedges are still available for free on a loan basis in the "Pay it Forward" thread.

    http://www.greenhulk.net/forums/showthread.php?t=96495
    Last edited by philip_gpr; 06-17-2009 at 12:54 PM.


  2. #2
    philip_gpr's Avatar
    Join Date
    Dec 2005
    Location
    Canada
    Posts
    2,724
    +1
    3
    .
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	wedges.JPG 
Views:	101 
Size:	543.4 KB 
ID:	136279  

  3. #3
    PolarisNut's Avatar
    Join Date
    Dec 2006
    Location
    Lower Michigan
    Posts
    1,809
    Those look great Phil. Price is more in line with what I would expect a wedge to cost.

  4. #4
    L Carlson's Avatar
    Join Date
    Aug 2007
    Location
    Bonita Springs, Florida, United States
    Posts
    7,118
    +1
    2
    TTT

  5. #5
    o uncola o's Avatar
    Join Date
    Aug 2008
    Location
    Pittsburgh, PA
    Posts
    1,060
    This is going to sound incredibly anal, but any chance of a 1.5 degree wedge?

    Also, is the $129 with anodized coating?

  6. #6
    Duke's Avatar
    Join Date
    Jul 2006
    Location
    Florida
    Posts
    10,004
    +1
    406
    Great info Philip!!

    Might want to try a 2 with my 0 degree Skat nozzle.

  7. #7
    philip_gpr's Avatar
    Join Date
    Dec 2005
    Location
    Canada
    Posts
    2,724
    +1
    3
    yes I can do a 1.5 though I would suggest you try a 1 and 2 to start

    from the feedback I am hearing on Leo's wedge 2 degrees is too much for a normally set-up ski - so even 1.5 might be too much

    yes I can anodize them for no charge - there might be a bit of a wait for this because to be cost effective I have to anodize a batch of parts at the same time

  8. #8
    leo's Avatar
    Join Date
    Jan 2006
    Location
    TAMPA
    Posts
    1,160
    +1
    19
    Quote Originally Posted by philip_gpr View Post
    yes I can do a 1.5 though I would suggest you try a 1 and 2 to start

    from the feedback I am hearing on Leo's wedge 2 degrees is too much for a normally set-up ski - so even 1.5 might be too much

    yes I can anodize them for no charge - there might be a bit of a wait for this because to be cost effective I have to anodize a batch of parts at the same time
    pilip you are full of shit.we run the 2 degrees on ow er ski.the feedback i got was your ski ran 71 mpr in Ohio with a 1530 big bore.and here you are making post on how to build a fast ski.you need to go and edited your post and put how to build a slow ski.

  9. #9
    L Carlson's Avatar
    Join Date
    Aug 2007
    Location
    Bonita Springs, Florida, United States
    Posts
    7,118
    +1
    2
    Quote Originally Posted by leo View Post
    pilip you are full of shit.we run the 2 degrees on ow er ski.the feedback i got was your ski ran 71 mpr in Ohio with a 1530 big bore.and here you are making post on how to build a fast ski.you need to go and edited your post and put how to build a slow ski.
    Lets post up some result from all! At this point I have lost friendship from Leo and Jim! All I did was post a comment on what I have heard. I tried to order one from Leo! Still nothing! Leo I am not starting shit Just want some good results! Sorry I lost You and Jim For a Friend! Lee

  10. #10
    THE PLATE MAN JIM'S PERFORMANCE's Avatar
    Join Date
    Nov 2005
    Posts
    6,194
    +1
    536
    Quote Originally Posted by L Carlson View Post
    Lets post up some result from all! At this point I have lost friendship from Leo and Jim! All I did was post a comment on what I have heard. I tried to order one from Leo! Still nothing! Leo I am not starting shit Just want some good results! Sorry I lost You and Jim For a Friend! Lee
    Lee put the beer down i did not say we are not friends. If you want give me a ring.

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Pump Wedge - available on a free loan basis
    By philip_gpr in forum Yamaha Classifieds
    Replies: 17
    Last Post: 03-31-2010, 02:02 PM
  2. ..From 80.4 to 81.1 from pump wedge and washers...
    By rxpredviper in forum 4-Tec Performance
    Replies: 2
    Last Post: 09-11-2009, 08:09 AM
  3. Replies: 0
    Last Post: 07-18-2009, 12:42 PM
  4. Replies: 12
    Last Post: 05-28-2009, 09:57 AM
  5. Where to buy 15f pump wedge?
    By AndyL in forum Kawasaki PWC Performance (4-stroke)
    Replies: 3
    Last Post: 05-27-2008, 08:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •