Page 1 of 5 1 2 3 ... LastLast
Results 1 to 10 of 43

Thread: Project-x 85+

  1. #1

    Project-x 85+

    I Just Bought New 2008 rxpx I Have 5 Hours On. The Power Just Wasn't Cutting It. Frank Rxp6 Started On The Project Today.. So Here We Go Again.

    Aeromotive A1000 Fuel Regulator
    Fuel Pump
    Rude Fuel Control System
    Pressure Relief Valves
    Rotax Racing Cam
    RIVA Rear Air
    Solas Impeller 15/22R
    RIVA 2° Pump Wedge
    RIVA VTS Extension Rod
    RIVA Reduction Nozzle
    R&D Intake Grate
    E/T 70-145 Race Supercharger
    RIVA Valve Train
    RIVA Intercooler GEN 1
    RIVA ECU
    Bosch 72LB Injectors
    RIVA Intercooler Water Strainer
    Ride Plate Mod
    RIVA/Jettrim custom seat cover
    RULE 2-1000 GPH bilge pump
    RIVA Pump Extension
    HKS BOV
    RIVA Aluminum Water Box
    ROTAX RACING Thermostat
    RIVA Stainless Steel Replacement Wear Ring
    R/E Block-Off
    Innovate LM1 AFR
    AutoMeter Liquid-Filled Boost Gauge,Oil Press,Fuel Press
    R&D Steering Nozzle
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	jet 592.JPG 
Views:	79 
Size:	1.21 MB 
ID:	137126   Click image for larger version. 

Name:	jet 589.JPG 
Views:	87 
Size:	1.22 MB 
ID:	137127   Click image for larger version. 

Name:	jet 591.JPG 
Views:	86 
Size:	1.04 MB 
ID:	137128   Click image for larger version. 

Name:	jet 590.JPG 
Views:	72 
Size:	1.18 MB 
ID:	137129   Click image for larger version. 

Name:	jet 588.JPG 
Views:	86 
Size:	1.52 MB 
ID:	137130   Click image for larger version. 

Name:	jet 587.JPG 
Views:	94 
Size:	1.33 MB 
ID:	137131  



  2. #2
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    Nice... but your going to run a wedge with the pump extension and a modded ride plate on an X at 85 mph... ... Better you than me...

  3. #3
    Quote Originally Posted by bigdaddyRXP View Post
    Nice... but your going to run a wedge with the pump extention and a modded ride plate on an X at 85 mph... ... Better you than me...
    I'm Going To Have One Of My Driver Ride It 1st Do u Think Workmen's comp Will Cover Him If Something Happen's. The Wedge Might Never Make It On.

  4. #4
    speedskixp's Avatar
    Join Date
    Feb 2008
    Location
    venice fl.
    Posts
    8,117
    +1
    120
    Quote Originally Posted by FAST RXP View Post
    I'm Going To Have One Of My Driver Ride It 1st Do u Think Workmen's comp Will Cover Him If Something Happen's. The Wedge Might Never Make It On.
    I bet Frank wont ride it.

  5. #5
    Nothin' better than Doo'in it! BigDaddyRXP's Avatar
    Join Date
    Aug 2007
    Location
    Tampa Bay, FL
    Posts
    9,202
    +1
    673
    Quote Originally Posted by FAST RXP View Post
    I'm Going To Have One Of My Driver Ride It 1st Do u Think Workmen's comp Will Cover Him If Something Happen's. The Wedge Might Never Make It On.
    I'm glad I don't work for you ...

  6. #6
    Been there and back! BDNJ's Avatar
    Join Date
    Jul 2005
    Location
    Silver Bay, Toms River, N.J.
    Posts
    1,536
    Looks like a great start. You should get there with careful tuning. I'm knocking on 84 with a 140 and no overstuff on accel or with throttle chop @ 79.

    Brendan


    BTW - no pressure relief valves either.

  7. #7
    S2R's Avatar
    Join Date
    Jul 2008
    Location
    New Braunfels, Texas
    Posts
    236
    Quote Originally Posted by bigdaddyRXP View Post
    I'm glad I don't work for you ...
    +1 Sounds like my old boss.

  8. #8
    Enufpwr's Avatar
    Join Date
    May 2005
    Location
    Lake St. Clair, Michigan
    Posts
    446
    Very Nice!!

    Just becareful with the rideplate mods. We found testing out Jim's open loop plate the over stuff is there mid to upper 80's speeds even with pressure reliefs. I think with the stock plate you should be fine up to 86mph.

  9. #9
    Quote Originally Posted by speedskixp View Post
    I bet Frank wont ride it.
    You got that right.

  10. #10
    ctriverguy's Avatar
    Join Date
    Aug 2007
    Location
    Ipswich, Massachusetts, United States
    Posts
    1,509
    +1
    8
    Quote Originally Posted by Enufpwr View Post
    Very Nice!!

    Just becareful with the rideplate mods. We found testing out Jim's open loop plate the over stuff is there mid to upper 80's speeds even with pressure reliefs. I think with the stock plate you should be fine up to 86mph.

    where are relieving the pressure in the tunnel, front or back, or both?

Page 1 of 5 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 1
    Last Post: 12-07-2015, 08:40 AM
  2. Fed. Income Tax - School Project help :)
    By Shibby1485 in forum Open Discussion
    Replies: 18
    Last Post: 02-13-2015, 09:09 PM
  3. WTB - Parts Looking for parts for 85 JS550 project.
    By wkuadam07 in forum Kawasaki Classifieds
    Replies: 10
    Last Post: 12-13-2014, 11:54 PM
  4. 85 JS 550 father son project
    By jackd1023 in forum Kawasaki Projects
    Replies: 12
    Last Post: 04-02-2013, 05:53 PM
  5. WTB Throttle Body for project
    By 1 FAST VE in forum 4-Tec Performance
    Replies: 2
    Last Post: 08-18-2005, 10:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •