Page 1 of 2 1 2 LastLast
Results 1 to 10 of 16
  1. #1

    Join Date
    Aug 2007
    Location
    Lenoir,NC 28645
    Posts
    37

    need help 05 RXT

    I have a 05 rxt that will only turn 6100 rpms and run 45 mph. sc is good , oil level is good ,impeller and wear ring is good and has no codes. ait takes off good and runs smooth then stops pulling at 6100 rpms . Can not figure this one out please hepl. Thanks Monte


  2. #2
    RustySeaRustyDoo's Avatar
    Join Date
    Oct 2005
    Location
    Chesapeake Bay-Pasadena, MD
    Posts
    1,788
    Quote Originally Posted by mozer View Post
    I have a 05 rxt that will only turn 6100 rpms and run 45 mph. sc is good , oil level is good ,impeller and wear ring is good and has no codes. ait takes off good and runs smooth then stops pulling at 6100 rpms . Can not figure this one out please hepl. Thanks Monte
    How do you know the SC is good??? Did you pull it?

  3. #3

    Join Date
    Aug 2007
    Location
    Lenoir,NC 28645
    Posts
    37
    Yes I replaced the clutches and set the slip

  4. #4
    canadaxp's Avatar
    Join Date
    Dec 2005
    Location
    Alberta Canada
    Posts
    727
    Change your plugs.

  5. #5
    meansvt00's Avatar
    Join Date
    Jul 2007
    Location
    New Jersey
    Posts
    237
    i would say it has to be the SC i would pull it and check it again. sounds like it slipping

  6. #6

    Join Date
    May 2008
    Location
    metairie,la
    Posts
    709
    Quote Originally Posted by mozer View Post
    I have a 05 rxt that will only turn 6100 rpms and run 45 mph. sc is good , oil level is good ,impeller and wear ring is good and has no codes. ait takes off good and runs smooth then stops pulling at 6100 rpms . Can not figure this one out please hepl. Thanks Monte
    make sure you dont have the learning key in it!!

  7. #7
    Gus13letter's Avatar
    Join Date
    Apr 2008
    Location
    Tampa Bay, FL
    Posts
    8,133
    +1
    821
    Did it all of the sudden drop? What was it running before? Anything change inbetween it running good till now? Plugs, SC slip, wear ring, and prop are all culprits.

  8. #8

    Join Date
    Aug 2007
    Location
    Lenoir,NC 28645
    Posts
    37
    I checked the sc twice and checked it mounted , new plugs , it does not miss , the learner key stops it at 35 mph but that is what it is like

  9. #9

    Join Date
    Aug 2007
    Location
    Lenoir,NC 28645
    Posts
    37
    rode it was ok next time started this , did not change anything in between

  10. #10
    King_Of_Fun's Avatar
    Join Date
    Jul 2007
    Location
    Catawba Island, Ohio
    Posts
    2,703
    What's the compression and the boost in psi?... Ron

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Need Help with RXT Electrical System!!
    By GvillePWCguy in forum 4-Tec Performance
    Replies: 0
    Last Post: 02-27-2011, 02:50 PM
  2. Need help:05 gti's won't turn
    By ManOverBoard21 in forum 2-Stroke Performance
    Replies: 1
    Last Post: 05-30-2010, 03:35 PM
  3. need HELP! 05 gpr
    By jayohentran in forum Yamaha PWC Performance (2-stroke)
    Replies: 17
    Last Post: 06-23-2009, 10:03 PM
  4. Need Help - '05 Rxp In Trouble
    By jwade in forum 4-Tec Performance
    Replies: 16
    Last Post: 08-18-2008, 08:08 AM
  5. Need a 05 RXT battery for Brother-in-law
    By f150vtx in forum Sea Doo Open Discussion
    Replies: 5
    Last Post: 06-05-2008, 08:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •