Page 1 of 10 1 2 3 ... LastLast
Results 1 to 10 of 93
  1. #1
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,628
    +1
    808

    4" Front Air Intake now available in the online store

    Hey guys,

    A lot of people wanted a complete kit to be offered so here it is:
    http://www.4-tecperformance.com/inde...oducts_id=1160

    The installation of this 4" air intake typically provides a 1.5-2.5 MPH gain and a 150-250 RPM gain. It's a substantial increase over the stock air intake system and even an improvement over a 3" system. It's the most effective air intake for getting power out of the motor in any water condition, safely and efficiently without fear of water ingestion. Supplied items include the proper length air intake hose, adapter for connecting the intake tube to the supercharger, stainless steel mesh Spectre air filter, Spectre aluminum adapter to connect the air tube to the air filter and all necessary clamps.

    Thanks,

    James


  2. #2
    Golden Jet red fox's Avatar
    Join Date
    Dec 2008
    Location
    DiJeddah
    Posts
    322
    Finally

    Fantastic

  3. #3
    snake4345's Avatar
    Join Date
    Mar 2009
    Location
    armuchee,ga
    Posts
    84
    that's awesome...

  4. #4

    Join Date
    Jul 2005
    Location
    Lake Dunlap, Texas
    Posts
    1,600
    +1
    28
    Does this set up pull in outside air or hot air from inside the hull?

  5. #5

    Join Date
    Jul 2007
    Location
    PDX - Oregon
    Posts
    2,205
    Awesome! the small performance gain would be a bonus for me. That damn Riva 3" setup is a pain to remove so I can grease the bearing carrier or access anything in that location.

  6. #6
    James I'm waiting on your Fizzle Stage 3 kit, but you still have to release 1 and 2!!!

    This is great though. With this, your IC kit, and a prop you can have a very solid ski for $900. No Motec required. J/K J/K.

  7. #7
    JFizzleJR's Avatar
    Join Date
    Aug 2005
    Location
    FL
    Posts
    8,628
    +1
    808
    Quote Originally Posted by Sundance View Post
    Does this set up pull in outside air or hot air from inside the hull?
    Ray, this kit runs up near the gas tank just like the stock intake, the Riva Powerfilter, and the R&D Power Plenum. Realistically, all air intakes offered on the market pull in hot air from inside the hull. The only way to do otherwise is to drill holes somewhere such as in the grab bar for a rear air intake. We did not want to release a kit that was liable to ingest water, whether it was the customer's choice to drill the holes or not.

  8. #8
    Steve STSPERFORMANCE's Avatar
    Join Date
    Dec 2007
    Location
    Cambridge, Ohio
    Posts
    2,701
    +1
    116
    Very nice setup=d>=d>

  9. #9
    Moderator RX951's Avatar
    Join Date
    Apr 2005
    Location
    League City, Texas
    Posts
    16,066
    +1
    23
    Quote Originally Posted by pdxrealtor View Post
    Awesome! the small performance gain would be a bonus for me. That damn Riva 3" setup is a pain to remove so I can grease the bearing carrier or access anything in that location.
    I Agree, the 3" RIVA is a pain to remove from the front of the motor.

    Nice Fizz

  10. #10
    AKA: Larry lafjax's Avatar
    Join Date
    Jul 2006
    Location
    Jacksonville, Fl
    Posts
    3,032
    Way to go James!! Good luck, nice kit!!

Page 1 of 10 1 2 3 ... LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 204
    Last Post: 03-07-2014, 12:43 PM
  2. Replies: 148
    Last Post: 06-17-2011, 08:24 AM
  3. Replies: 6
    Last Post: 12-09-2010, 11:04 PM
  4. XS Intercooler Kit now available in the online store
    By JFizzleJR in forum 4-Tec Performance
    Replies: 182
    Last Post: 01-17-2010, 08:40 PM
  5. Groco water strainers now available in the online store!
    By Green Hulk in forum 4-Tec Performance
    Replies: 111
    Last Post: 12-02-2006, 12:08 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •