Results 1 to 6 of 6

Thread: O,rings

  1. #1
    Flying Scotsman's Avatar
    Join Date
    May 2006
    Location
    IllINOIS
    Posts
    6,514
    +1
    4

    O,rings

    I have a aftermarket head I plan on using in the near future and it turns out im missing some o,rings

    new rings cost about $40 shiped
    thats only 9 orings and then the 2 large rings that go around the profile of the head on the top and bottom.

    I dont need the 2 large perimiter rings just the 9 rings 3 per dome.
    Im going to go look for some bulk o,ring,s to purchase and I need to know what sizes the o,rings are.
    Im am not by my extra domes to measure the o,ring cavities in the domes.


    Back to the O-Ring Page

    Can anyone tell me what the sizes are for the 3 o,rings on each dome.


  2. #2
    Hockey369's Avatar
    Join Date
    Jun 2007
    Location
    Windsor Locks, CT
    Posts
    312
    For an ADA Head heres the o-ring package

    http://www.adaracing.com/personal-wa...29998803a53f44

    The 3 per dome ones are just viton o-rings, here is a sizing charge for the o-rings. The smallest is 020, next is 024, then 043 for the ada head.

    http://www.allorings.com/size_cross_...nce_framed.htm

    Hope that helps...

  3. #3
    Flying Scotsman's Avatar
    Join Date
    May 2006
    Location
    IllINOIS
    Posts
    6,514
    +1
    4
    $25 for the ada kit is a better deal and it probably would work but i'll buy them in bulk.

    I used alloring for my pipes in the past



    To All of Our allorings.com, Inc. Customers and Friends:



    Those of us at allorings.com, Inc. are happy to announce


    that we have recently been acquired by


    Marco Rubber & Plastic Products Inc.



    Because the staff at allorings.com, Inc. will now be members of the Marco Rubber team, you will continue to receive the same great service – as well as a more comprehensive website, and direct phone contact to our Product and Service Consultants.

    While integrations are being completed, our allorings.com, Inc. web customers may still continue to order through our allorings.com, Inc. shopping cart (Invoices and credit card charges will reflect Marco Rubber). You may also order directly through Marco Rubber’s site (our Consultants are here to assist you with a walk-through – if needed).*
    *Bag quantities and prices may be different between the two sites.

    For customers that email or fax their orders, you can continue to do so by emailing to [email protected] or faxing to 978-688-6915.

    We thank you for your support over the years, and look forward to continuing to serve you in the years to come!!


    Very Best Regards,


    All of Us At



    allorings.com, Inc.



    &






    Ph: 1-978-688-3500 Fax: 1-978-688-6915





  4. #4
    Flying Scotsman's Avatar
    Join Date
    May 2006
    Location
    IllINOIS
    Posts
    6,514
    +1
    4
    O,rings should be here any day now I wonder if I got the right ones

  5. #5
    Flying Scotsman's Avatar
    Join Date
    May 2006
    Location
    IllINOIS
    Posts
    6,514
    +1
    4
    Alll good I have o,rings for pro tec and pro design (I think) domes for a 65U if you need some let me know.

  6. #6
    We are manufacturer in o rings and oil seals,large rubber material selcetion,VITON,NBR,EPDM,Silicone,HNBR,ect
    rubber seals
    rubber gasket
    rubber washer
    www.cnrubberparts.com

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. TIP - Bar Extensions and Wear Ring Info
    By MikeTrin in forum Sea Doo How To & FAQs
    Replies: 7
    Last Post: 06-19-2007, 03:05 PM
  2. stainless steel wear ring
    By shortee in forum 4-Tec Performance
    Replies: 12
    Last Post: 06-18-2005, 09:36 PM
  3. wear ring damage
    By INDY27 in forum 4-Tec Performance
    Replies: 18
    Last Post: 05-25-2005, 08:41 PM
  4. wear ring removal
    By watermedic in forum Sea Doo Open Discussion
    Replies: 6
    Last Post: 05-18-2005, 09:12 AM
  5. wear ring
    By nitro rxp in forum 4-Tec Performance
    Replies: 16
    Last Post: 05-12-2005, 05:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •