Thread: pump cavitation
06-25-2009, 04:43 PM #1
i have a problem with ultra 150 the pump cavitation is very bad but it is more when trim is all the way down,the pump is completly rebuilt with new solas,the clerance between impeller and wear ring is almost nothing ,could anybody give me some advice what to do next ,feel free to ask me for more info
06-25-2009, 04:49 PM #2
You probably need to reseal your plate and grate. That is usually what causes it on the 150. Wear ring clearance should be .006 in .
06-25-2009, 04:50 PM #3
07-01-2009, 11:54 AM #4
I was having the same issue after I had my pump rebuilt and shimmed. I put new pump seal and eyeglass seal and used 1/2 tube of silicone on the grate and plate and now there is no more issue.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By motosyko in forum Polaris PWC PerformanceReplies: 10Last Post: 03-08-2013, 02:45 PM
By dpowellmeii in forum Yamaha PWC Performance (2-stroke)Replies: 1Last Post: 08-23-2010, 06:08 AM
By tall1 in forum 2-Stroke PerformanceReplies: 2Last Post: 07-15-2010, 03:57 PM
By elbchecker in forum 4-Tec PerformanceReplies: 0Last Post: 06-17-2008, 10:52 AM
By Jetscreamer in forum Yamaha PWC Performance (2-stroke)Replies: 7Last Post: 05-08-2007, 07:16 PM