Results 1 to 3 of 3
  1. #1

    1995 SLT750 Carb rebuild

    I'm trying to remove the carb from the motor and I got all of the bottom nuts off and only two of the top bolts...the other 4 are pretty much impossible. There is almost no room to move and remove the top bolts.


    Is there a science to it or a special tool?

    Please let me know!

    Thanks!


  2. #2
    Bing-A-Ding-Ding-Ding, Brrrrrap! Brrrrrrrrrap!!! Polaris_Nut#1's Avatar
    Join Date
    Aug 2006
    Location
    Pittsfield, MA
    Posts
    3,350
    +1
    26
    Maybe you miss understood.


    The best way to do this is standing on the exhaust side of the ski and reaching over and going by feel. You can NOT see what you are doing at all. It's a PITA. Another tip, take out the 6 bolts or nuts on the bottom of the intake. No the intake does not have to come off. But you get the wrenches pinched in there and will get it trapped using a box end. Then take the 6 nuts off holding the carbs. Just remember put the 6 carb nuts on then the bolts back in. You want to use gear or ratchet wrenches if you got them. Have fun....lol

  3. #3
    Bing-A-Ding-Ding-Ding, Brrrrrap! Brrrrrrrrrap!!! Polaris_Nut#1's Avatar
    Join Date
    Aug 2006
    Location
    Pittsfield, MA
    Posts
    3,350
    +1
    26
    look at the red

    6 nuts hold the carbs, you're trying to pull the manifold. You can get that off much easier after. You should check the reeds while the carbs are off.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	3056C001.JPG 
Views:	52 
Size:	65.0 KB 
ID:	138876   Click image for larger version. 

Name:	3056C003.JPG 
Views:	44 
Size:	87.0 KB 
ID:	138877  

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. KEIHIN Carb Rebuild 1995/ No gas in Venturi
    By DAC_SC in forum Kawasaki Open Discussion
    Replies: 1
    Last Post: 05-09-2014, 10:08 PM
  2. SLT750 Carb Rebuild, Anyone want to do it?
    By Seanace1 in forum Polaris Projects
    Replies: 3
    Last Post: 06-18-2009, 08:17 PM
  3. Stumped-Problem with a 1995 657X Carb Rebuild
    By scooter123 in forum 2-Stroke Performance
    Replies: 14
    Last Post: 10-10-2007, 06:09 AM
  4. Need carb rebuild kit for '98 GP800
    By qbzonk in forum Yamaha Open Discussion
    Replies: 3
    Last Post: 12-15-2006, 07:57 PM
  5. carb rebuild kits
    By GPRsmartarse in forum Yamaha PWC Performance (2-stroke)
    Replies: 5
    Last Post: 04-04-2006, 03:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •