06-28-2009, 06:29 PM #1
What to use when capping oil ports?
I bought the block of plate through the online store and it didn't come with any nipples. I assume this is normal. Anyways, what do ya'll use to block off the oil ports on the intake? I have some nipple covers but they are not as tight as I would want them. I can zip tie them and i can still manage to pull them off. Thoughts?
06-28-2009, 06:31 PM #2
- Join Date
- Oct 2005
yes, get smaller nipples. I think the ones supplied in other kits are some kind of soft plastic
06-28-2009, 06:34 PM #3
If you never plan to return to oil injection (a good thing), I filled the ports with JB weld.
06-28-2009, 06:41 PM #4
ACE Hardware has plastic caps in this size. You can find them in the hardware section.
06-28-2009, 06:58 PM #5
I ordered a set of vacuum caps from the local auto parts store and zip tied them
06-28-2009, 07:13 PM #6
I buy them in bags of 100, pm me your address and I will drop some in the mail.
06-29-2009, 12:09 PM #7
06-29-2009, 12:09 PM #8
06-29-2009, 12:11 PM #9
06-29-2009, 12:19 PM #10
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By G.R.B in forum Sea Doo Open DiscussionReplies: 3Last Post: 09-03-2012, 06:33 PM
By baba850r in forum 4-Tec PerformanceReplies: 13Last Post: 07-21-2009, 06:13 PM
By Juscruzn in forum Polaris How To & FAQsReplies: 2Last Post: 06-27-2007, 04:25 PM
By Flynfox in forum Sea Doo Open DiscussionReplies: 8Last Post: 02-16-2007, 04:31 PM
By GP1500SC in forum Yamaha PWC Performance (2-stroke)Replies: 5Last Post: 07-19-2006, 11:04 AM