Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12
  1. #1
    zchess's Avatar
    Join Date
    Apr 2009
    Location
    Tallahassee
    Posts
    16

    Question about a flywheel cover.

    I need a flywheel cover for one of my skis. The only reason is because the grease fitting has broken off. If the grease fitting is not important please let me know. If it is important let me know if any of you guys have one avaiable or know of anyone.
    Thanks,
    Zach


  2. #2
    Hockey369's Avatar
    Join Date
    Jun 2007
    Location
    Windsor Locks, CT
    Posts
    312
    Do you still have the grease fitting? You can JB Weld it back on if you still have it.

  3. #3
    Flying Scotsman's Avatar
    Join Date
    May 2006
    Location
    IllINOIS
    Posts
    6,514
    +1
    4
    Usually not needed but if you need one I have some I may even have a brand new one.
    Make me an offer for either a new one or a used one if you like I would love to get rid of one
    Low $$$ and shipping

  4. #4
    pilo704's Avatar
    Join Date
    Jul 2008
    Location
    dirty jerzz
    Posts
    830
    run premix and cap it off, that zerk fitting is for the oil pump..

  5. #5
    Flying Scotsman's Avatar
    Join Date
    May 2006
    Location
    IllINOIS
    Posts
    6,514
    +1
    4
    Grease fitting is for the starter bendix

  6. #6
    pilo704's Avatar
    Join Date
    Jul 2008
    Location
    dirty jerzz
    Posts
    830
    no kidding, i just assumed it was for the oil pump because the msd covers dont have a greese fitting

  7. #7
    Old Ski Insanity w/rpm500's Avatar
    Join Date
    Aug 2005
    Location
    Crystal River Fl
    Posts
    2,208
    the fitting is there to ease greaseing the bendix... take the cover off the ski.. have it drilled (they'er generally pipe thread so it may even walk out with a LH drill bit..)
    or have it tapped for the next larger zirk fitting and your good..otherwise plug it with dab of epoxie to seal it and just remove the starter or cover at every mantainance interval to regrease it...

  8. #8
    zchess's Avatar
    Join Date
    Apr 2009
    Location
    Tallahassee
    Posts
    16
    okay thanks, I dont have to flange that comes out to jb weld it. So if I expoxy it i should have no problem right. When you say to grease it how many hours should you do it? like the amount of use inbetween grease jobs

  9. #9
    Flying Scotsman's Avatar
    Join Date
    May 2006
    Location
    IllINOIS
    Posts
    6,514
    +1
    4
    I have one brand new,or you could go to the oem parts finder and buy a nipple.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	CRIM0174.JPG 
Views:	25 
Size:	762.2 KB 
ID:	139666   Click image for larger version. 

Name:	CRIM0175.JPG 
Views:	26 
Size:	779.6 KB 
ID:	139667  

  10. #10
    zchess's Avatar
    Join Date
    Apr 2009
    Location
    Tallahassee
    Posts
    16
    is it hard to take off the cover

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Question about OEM outdoor covers.
    By rattlsnak in forum Sea Doo Open Discussion
    Replies: 13
    Last Post: 10-29-2014, 01:07 AM
  2. Question about PTO cover
    By ModularJunk in forum 4-Tec Performance
    Replies: 3
    Last Post: 08-05-2012, 06:38 PM
  3. Question about timing cover(pto cover)??
    By ModularJunk in forum 4-Tec Performance
    Replies: 0
    Last Post: 07-31-2012, 07:48 AM
  4. Noob questions. Took off flywheel cover and tons of shavings stuck to flywheel. Help!
    By southernmaryland in forum Kawasaki PWC Performance (2-stroke)
    Replies: 2
    Last Post: 07-25-2011, 09:26 PM
  5. Question about seat covers....
    By Charlie305 in forum Yamaha PWC Performance (2-stroke)
    Replies: 2
    Last Post: 04-27-2011, 08:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •