Thread: Pin hole leak in Exhaust Pipe
06-30-2009, 05:03 PM #1
Pin hole leak in Exhaust Pipe
Finally figured out where all the water in my bildge was coming from. I have a pin hole leak in the TIG weld line on my port side exhaust pipe.
I called the dealer to see if its covered under the BEST Warranty. Need to bring it in so they can check it out/document it.
They are pretty busy right before the 4th and I'm sure the pipe is not a stock item.
Checking to see if anyone had this problem and would like to know if JB weld could be used as a temporary fix until then new pipe is on order.
06-30-2009, 06:57 PM #2
- Join Date
- Jun 2008
- Jacksonville, FL
Yes, JB weld would be good for a temp fix. Glad you found the small problem.
Enjoy the boat! I definiatly would not wait and wait for the dealer. You could get it spot welded for under $50 if need be. Good as new.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By modblaster in forum 2-Stroke PerformanceReplies: 1Last Post: 09-21-2011, 07:40 PM
By Deanrw3 in forum 2-Stroke PerformanceReplies: 1Last Post: 05-20-2009, 08:10 PM
By 240witSR in forum 2-Stroke PerformanceReplies: 7Last Post: 07-14-2008, 08:21 PM
By WildBill9000 in forum 4-Tec PerformanceReplies: 1Last Post: 09-12-2007, 07:20 PM
By msxplorer in forum Polaris Open DiscussionReplies: 8Last Post: 05-15-2007, 02:39 AM