Thread: WFO: Flow-Rite Vents w/ pics
07-28-2006, 03:33 AM #1
WFO: Flow-Rite Vents w/ pics
Hey buddy. Tried returning your PM, but it says you're full and have to take out the garbage!!
Anyhow, the Flow Rites come from http://www.startinglineproducts.com/.
They make 2 & 2 1/2" which are here http://www.startinglineproducts.com/...&productID=356
And they also make a 4" which is here
Hope all is well dude...
07-28-2006, 07:11 AM #2
Not to jump in ya'll's conversation....
I just want to say thanks for posting that Crazy-A ! Thats a neat item !
I found a couple of other vendors too
and on Ebay...scroll to the bottom
07-28-2006, 09:41 AM #3
07-28-2006, 09:53 AM #4
No problem RX!! My pleasure. They work well too. When I first started using them, I put them under the kitchen sink and they wouldn't flow water unless you really cranked the pressure and hit them at a perfect 90* angle, but yet you can breath through them like they don't exist!! Sweet.
The best part is that the sled guys have been doing our testing for us for years. They must trust them too. Check out pic #1 and just imagine going for the pass with a 200+ hp machine with an 1 1/2" deep lug, picked track slinging all kinds of slop all over your ride... they must work!!!
The other pics are a few applications that I've used them for. The ones in my GPR seat actually look much better in real life as I've since run a tiny bead of black silicone around them for looks!!! I really like these things for evacuating some of the bad air in the hull, although they'd be great for incoming air as well.
07-28-2006, 09:57 AM #5The ones in my GPR seat actually look much better in real life as I've since run a tiny bead of black silicone around them for looks!!!
07-28-2006, 10:01 AM #6
They're actually in there real good Rich. They'll never come out or leak around the edges, I just did it to "clean up" the edges so-to-speak. (but I like the glue gun idea too! )
07-28-2006, 10:02 AM #7
I will be buying some
I have never been a fan of cutting any holes ( dont' have any), but with this device, I will now.
BTW, I am moving this over to the performance section !!
well, darn.....it wont' let me.....hhmmm...
07-28-2006, 10:06 AM #8
I already have the holes drilled, and may have a little slop in there. Depending on the sizes. I will check it out.
Thanks for the link
07-28-2006, 10:21 AM #9
Hey guys, shibbster is going to change this thread title to FLOW-RITE vents. This is a good thread. I will also rate it as a 4 star.
Good performance item !
07-28-2006, 10:34 AM #10
Billy doesn't have all the secret powers yet... actually, neither do i
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By RXPT400 in forum Sea Doo ClassifiedsReplies: 4Last Post: 09-05-2010, 07:48 PM
By RX951 in forum 4-Tec PerformanceReplies: 9Last Post: 07-04-2008, 02:30 PM
By rior1 in forum 4-Tec PerformanceReplies: 3Last Post: 05-29-2007, 02:43 AM
By mxl16 in forum 4-Tec PerformanceReplies: 6Last Post: 05-24-2007, 06:18 PM
By CrazyA in forum 4-Tec PerformanceReplies: 9Last Post: 07-28-2006, 10:34 AM