Results 1 to 3 of 3
  1. #1
    richrxp's Avatar
    Join Date
    Jun 2006
    Location
    Netherlands
    Posts
    949
    +1
    1

    Post easy installing the freeflow exhaust on x- models

    AFTER READING HOW MUCH TROUBLE IT TAKES TO REMOVE THE RESONATOR I TRIED SOMETHING ELSE.

    LAST WEEK I REMOVED THE FLAMEARRESTOR FROM THE INTAKEMANIFOLD.

    THAT'S WHEN I NOTICED ,HOW MUCH SPACE THERE IS IN THE HULL WITH THE INTAKEMANIFOLD REMOVED.

    TODAY I INSTALLED THE HOMEMADE FREE-FLOW EXHAUST IN MY RXT-X.

    I TOOK FIRST THE INTERCOOLER AND EXHAUST HOSES OFF.

    THEN REMOVED THE INTAKEMANIFOLD (not that difficult to do! )

    THEN I LOOSEND THE HOSECLAMP ON THE RESONATOR,TOOK THE BOLT OUT WHICH SECURES THE RESONATOR TO THE INSIDE OFF THE HULL.

    THEN CAME THE EASY PART ,I COULD JUST SLIDE THE RESONATOR OUT OFF THE HULL,BECAUSE THE INTAKEMANIFOLD WAS TAKEN OUT!

    SO NO MORE CUTTING ,BURNING OR OTHER DESTRUCTIVE THINGS YOU HAVE TO DO TO GET THE RESONATOR OUT.

    THIS IS THE TUBE I USED AS FREE-FLOW EXHAUST (thanks MPower ! )


    http://www.cxracing.com/mm5/merchant...gory_Code=PIPE

    AFTER THAT, PUT THE FREE-FLOW PIPE IN ,FASTEN THE HOSECLAMP ,AND REINSTALL THE INTAKEMANIFOLD AND ALL THE HOSES.

    AND THEN ENJOY THE BRUTAL SOUND!!!!!


  2. #2
    jwade's Avatar
    Join Date
    May 2007
    Location
    Clarksville, Tn
    Posts
    228
    Your link was broken. Is this is the one you were talking about?

    http://www.cxracing.com/mm5/merchant...gory_Code=PIPE

  3. #3
    richrxp's Avatar
    Join Date
    Jun 2006
    Location
    Netherlands
    Posts
    949
    +1
    1

    Smile

    Thanks,

    Something went wrong.


    I changed the link ,should be working now.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 18
    Last Post: 04-18-2016, 06:02 PM
  2. I installed the TBM sponsons on my FZR
    By Green Hulk in forum Yamaha PWC Performance (4-stroke)
    Replies: 20
    Last Post: 05-24-2012, 07:52 PM
  3. i need the freeflow exhaust exit hose please
    By sea-one in forum 4-Tec Performance
    Replies: 5
    Last Post: 04-03-2011, 08:51 AM
  4. Installed the 4" kanaflex on the '08 TX
    By dr_hunt in forum 4-Tec Performance
    Replies: 5
    Last Post: 05-23-2009, 12:37 PM
  5. Removing the Freeflow exhaust?
    By Super in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 06-12-2006, 12:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •