Results 1 to 4 of 4
  1. #1

    Quick question about my block off plate?

    I have a 2004 gp1300r and im going to do the oil block off plate tomorrow.I know how to do it but my question is do i remove anything from the motor besides the oil pump,i dont have to remove any sort of shaft or anything inside the motor after i take off the oil pump do i?Thanks for any replies.


  2. #2
    Mike xsockguyx's Avatar
    Join Date
    Sep 2007
    Location
    NJ
    Posts
    1,744
    +1
    2
    Quote Originally Posted by zxiripper View Post
    I have a 2004 gp1300r and im going to do the oil block off plate tomorrow.I know how to do it but my question is do i remove anything from the motor besides the oil pump,i dont have to remove any sort of shaft or anything inside the motor after i take off the oil pump do i?Thanks for any replies.
    Take out your entire exhaust, then i just got a mirror and put it inside the hull so i could see the bolts and removed the oil pump and put the block off plate in. I did put some RTV sealant on the block off kit for the hell of it.

  3. #3
    XL1200Ltd-Keith's Avatar
    Join Date
    Aug 2005
    Location
    Arizona
    Posts
    506
    The oil injection pump is driven off of the flywheel bolt, so you only need to pull the pump off. If you are careful you can save the gasket, it is paper and tends to stick.

  4. #4
    Thanks alot for answering my question.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 2001PR 800 questions , jetting, block off plate , etc
    By [email protected] in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 02-11-2012, 09:50 PM
  2. have a quick question about O.P.A.S. Performance Block-off Kit
    By lost boyz in forum Sea Doo Open Discussion
    Replies: 12
    Last Post: 07-21-2010, 01:13 PM
  3. Two questions about block off plates install
    By RXT-X in forum 4-Tec Performance
    Replies: 10
    Last Post: 07-16-2009, 09:36 AM
  4. Rxt transom block off plate question
    By Pinoy in forum 4-Tec Performance
    Replies: 9
    Last Post: 04-17-2009, 04:08 PM
  5. recall question (block off plate)
    By GDM in forum Kawasaki PWC Performance (4-stroke)
    Replies: 3
    Last Post: 01-06-2008, 09:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •