Thread: Fuel Line Assignments
07-07-2009, 12:54 PM #1
- Join Date
- May 2008
Fuel Line Assignments
I have a 96 Seadoo GTX. It has the grey tempo fuel lines which I will soon be in the process of changing. The selector valve is probably clogged with gunk because the previous owner bypassed the valve in order to get the ski to run better one day. That evidently worked for a little while but there is a clog elsewhere. I intend to change all fuel lines and clean all screens. My problem is that the previous owner bypassed the fule selector valve and I am unsure which line goes where. Any insight would be appreciated.
07-07-2009, 01:29 PM #2
easy.. blow!! Turn the selector to reserve and blow into it..the line that lets air out is the reserve.. same procedure with the on..
07-07-2016, 10:12 PM #3
- Join Date
- Jul 2016
You mean put it back together to do that? It is all uninstalled and taken apart right now.
Guess I can simulate that by turning stem.
07-08-2016, 07:31 AM #4
07-08-2016, 09:43 AM #5
The valve is marked, on and res. Those lines go to the tank where its also marked, vent, on, res, ret. The center line from the valve goes to the "in" on the fuel filter. The "out" on the filter goes to the carb. The ret. line from the carb goes to the ret. on the tank.
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By GP1500SC in forum Yamaha PWC Performance (2-stroke)Replies: 5Last Post: 07-19-2006, 11:04 AM
By ABBOTT in forum Yamaha How To & FAQsReplies: 0Last Post: 05-26-2006, 08:09 PM
By NeVerMind in forum Yamaha PWC Performance (2-stroke)Replies: 6Last Post: 05-24-2006, 04:31 PM
By cfgp927 in forum Yamaha PWC Performance (2-stroke)Replies: 13Last Post: 01-22-2006, 04:04 PM
By GPRsmartarse in forum Yamaha PWC Performance (2-stroke)Replies: 2Last Post: 10-08-2005, 12:16 AM