Thread: Sea Doo X washer problem
07-09-2009, 11:09 AM #1
Sea Doo X washer problem
Sea Doos X washers (60 hours) are poor quality, my last set of Riva washers have over 200hours on an 06 RXP. Sea Doo also forgot to torque an screw for my PTO oil pump. Time for a turbo....
07-09-2009, 11:50 AM #2
That looks bad.
Never found a torx bolt in my oilpump.
The metal pieces must be your bullet proof metal washers.
I had the same problem ,mine went with 30 hrs on it.
Bad thing was my bearings went also ,gave a big mess!!
07-09-2009, 12:04 PM #3
- Join Date
- Jul 2009
dam that sux bro
07-09-2009, 12:53 PM #4
I was lucky as the engine has no damage outside of the oil pumps. Timming chain, stator, fly wheel gears look like new. The only good thing about this is I found that stray oil pump screw before it got past the screen.
07-09-2009, 12:59 PM #5
Good for you!
My engine was full of metal pieces.
Damage was not all to bad ,had to replace one valve,starter had some scratches but was ok.
New supercharger , old one was completely ruined.
Intercooler was full off metal from supercharger impeller,but after cleaning no leaks.
Inlethose to intercooler was pierced by metal pieces.
But after rebuild is running fine!!!!!
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
By chippy in forum 2-Stroke PerformanceReplies: 1Last Post: 09-09-2013, 07:47 PM
By kimi311 in forum Sea Doo Sport BoatsReplies: 1Last Post: 07-26-2010, 04:48 AM
By AMac in forum Sea Doo Open DiscussionReplies: 0Last Post: 06-20-2010, 11:13 AM
By huseby76 in forum Sea Doo Sport BoatsReplies: 4Last Post: 08-07-2008, 09:07 AM
By bymorris in forum Sea Doo Open DiscussionReplies: 2Last Post: 02-21-2008, 11:49 AM