Results 1 to 8 of 8
  1. #1
    RxPrider's Avatar
    Join Date
    Jul 2006
    Location
    lake ozark
    Posts
    298

    Riva stage one kit

    I am thinking of ordering a riva stage one kit for my 06 rxp, and i want to know if there is any other little mods i can get that will help alot. Also if i happen to get the Thru hull exhuast, the opas removel block off plates, are the Pro series alot better than the perf. plates from riva?


  2. #2
    EZ Dock of Long Island Shibby1485's Avatar
    Join Date
    May 2005
    Location
    Long Island, NY
    Posts
    9,464
    +1
    4
    the pro-series are defintiely better... but the best ones all-together are these:
    http://www.4-tecperformance.com/inde...roducts_id=352

    what else can u do? definitely fill in the bolts holes on your rideplate, let the hull breathe and get air flow as much as possible. remove the big ducts and vents.

  3. #3
    RxPrider's Avatar
    Join Date
    Jul 2006
    Location
    lake ozark
    Posts
    298
    cool, i'll try filling the rideplate holes, and try and get the pro series if possible (money wise).
    Last edited by RxPrider; 07-30-2006 at 03:44 PM.

  4. #4

    Join Date
    Jul 2006
    Location
    Indian Lake Ohio
    Posts
    83
    I just want to make sure, but the race engineering block off does come with hardware right.

  5. #5
    EZ Dock of Long Island Shibby1485's Avatar
    Join Date
    May 2005
    Location
    Long Island, NY
    Posts
    9,464
    +1
    4
    Quote Originally Posted by Lake rat RXP
    I just want to make sure, but the race engineering block off does come with hardware right.
    no hardware needed.... all you use is the 4 allen bolts that you have after you remove the OPAS assembly.

  6. #6
    Site Admin Green Hulk's Avatar
    Join Date
    Apr 2005
    Location
    Morgan City, LA
    Posts
    36,398
    +1
    2,524
    The Race Engineering block offs come with the hardware to mount them. It comes with hex bolts and washers.

  7. #7

    Join Date
    Jul 2006
    Location
    Indian Lake Ohio
    Posts
    83
    Thanks for answering so quick, now where are the ducts and vents that I could remove on a rxp.

  8. #8
    EZ Dock of Long Island Shibby1485's Avatar
    Join Date
    May 2005
    Location
    Long Island, NY
    Posts
    9,464
    +1
    4
    well forget what i said about the hardware

    ur not gonna gain much, but i find removing the vents and ducts lets the hull breathe a little better, removes the clutter, and gets the cool air closer to places where it matters.

    however, removing all these vents and ducts puts u at risk IF the machine was to flip over. they act as snorkels so when the machine is upside down water does not rush in.

    these vents are found at the rear under the seat, and also up front under the glove box. big black hollow tubes.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Is riva stage one kit on rxp really worth it ?
    By rxp91 in forum 4-Tec Performance
    Replies: 0
    Last Post: 07-26-2010, 05:18 PM
  2. 09 rxp-x riva stage one kit
    By benjamin rxp x in forum Sea Doo Open Discussion
    Replies: 1
    Last Post: 06-10-2010, 08:57 PM
  3. Riva Stage One Kit SHO
    By earwig in forum Yamaha PWC Performance (4-stroke)
    Replies: 1
    Last Post: 04-19-2009, 08:21 AM
  4. Riva Stage One Kit Major Loss of Power
    By Empirenj250 in forum Kawasaki PWC Performance (4-stroke)
    Replies: 22
    Last Post: 07-25-2008, 10:00 PM
  5. Where should trim be with riva stage one kit
    By macattack in forum 4-Tec Performance
    Replies: 3
    Last Post: 06-30-2005, 09:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •