Results 1 to 3 of 3
  1. #1

    1996 Xp 800 starting issues

    I finally fixed the starter issues and now the bike is turning over. I reinstalled the carburaters and now it seems like it's not getting any fuel. I've double checked all of the fuel lines. Any recommendations or how long does it take to start drawing in fuel from the lines?

  2. #2
    flyin' the friendly skies airbornexp's Avatar
    Join Date
    Aug 2007
    Mahomet, Il. USA
    should take a couple cranks. open the fuel bowl under the handle bars and see if there is fuel in the bowl. if not, take the plugs out. put your hand over the carbs and crank it over till you feel fuel on your hand. you will feel the carbs sucking on your palm a bit

  3. #3
    there are many places to start but the first place is make sure the fuel switch is on, make sure your tank is holding pressure and your pulse line is connected to the case and the carbs

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 1996 Seadoo Gtx starter removal and starting issue
    By svt killer in forum 2-Stroke Performance
    Replies: 0
    Last Post: 06-02-2013, 07:45 PM
  2. 1996 Polaris SLT 700 Issue-will not start
    By kimmyplease in forum Polaris Open Discussion
    Replies: 11
    Last Post: 11-25-2012, 02:25 PM
  3. Replies: 16
    Last Post: 05-30-2007, 01:49 PM
  4. 96XP starting issues...
    By KeithKman in forum 2-Stroke Performance
    Replies: 3
    Last Post: 01-04-2007, 11:01 AM
  5. Starting issue or not?
    By GPR FL in forum Yamaha PWC Performance (2-stroke)
    Replies: 3
    Last Post: 05-01-2006, 04:52 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts