Results 1 to 9 of 9
  1. #1

    SC bolt replacement

    Anyone know the exact bolt threads/sizes for the bolts to replace the 4 SC bolts.

    I'm wanting to go to SS hex bolts to replace the torx bolts.

    ...still stuck on trying to remove the back bolt too


  2. #2
    SplishSplash's Avatar
    Join Date
    May 2006
    Location
    Belle River Ont Canada
    Posts
    1,181
    +1
    98
    4 bolts? Is it not mounted with 3 bolts? I just got the racheting torx set from sears to get that top bolt. You will have to grind the wrench a little to get it to fit and not hit the boss. But the nice thing is ther are rachetting and makes getting the top bolt out easy. The other 2 bolts are easy to get out with a torx socket and rachet.
    I suppose buying the bolts would be cheaper but would still be hard to get the top one out, you still would need a rachetting wrench or patience.

    http://www.sears.com/sr/javasr/produ...seBVCookie=Yes

  3. #3
    Vman's Avatar
    Join Date
    Nov 2005
    Location
    NJ
    Posts
    4,363
    +1
    339
    6mm x 35 @ 1.0 pitch. 3 bolts.

  4. #4
    Quote Originally Posted by Vman
    6mm x 35 @ 1.0 pitch. 3 bolts.
    sounds like someone has been there done that!!!...PR...

  5. #5
    Quote Originally Posted by Vman
    6mm x 35 @ 1.0 pitch. 3 bolts.
    Thanks, sorry I meant 3 bolts. Accidentally removed 4(put it back)

    The back bolt I removed using a 1/4 ratchet that I sanded the head down until I got a little to the gears. Also I think using the torch did the trick to loosen that loctite.

  6. #6
    Got Boost? psycho rxp's Avatar
    Join Date
    Jul 2005
    Location
    Port St. Lucie, FL
    Posts
    5,445
    +1
    182
    the 06 models all come with ss hex head bolts now

  7. #7
    Looks like they are (3) SS M6 - 1.0 pitch, 35mm for the SC to engine.(9) 25mm for the SC housing.

    I called a local shop they said they had 35mm allen head. Would this work ?
    Last edited by Kinchyle; 08-02-2006 at 10:00 AM.

  8. #8
    Vman's Avatar
    Join Date
    Nov 2005
    Location
    NJ
    Posts
    4,363
    +1
    339
    An allen head for that top bolt would probably be a pain in the neck to tighten/loosen- but it would work...

  9. #9
    Vman's Avatar
    Join Date
    Nov 2005
    Location
    NJ
    Posts
    4,363
    +1
    339
    Oh, 9 bolts for the SC housing.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. SC bolt Size and alternates?
    By Ocman in forum 4-Tec Performance
    Replies: 13
    Last Post: 04-24-2010, 07:13 PM
  2. SC clutch replacement instructions?
    By gbest in forum Sea Doo Open Discussion
    Replies: 5
    Last Post: 07-22-2008, 09:41 AM
  3. Pro 785 head bolts? replace with what?
    By RedlineR6 in forum Polaris Open Discussion
    Replies: 2
    Last Post: 04-12-2008, 09:09 AM
  4. SC Bolt Need help!!!
    By RustySeaRustyDoo in forum 4-Tec Performance
    Replies: 48
    Last Post: 12-05-2006, 12:47 AM
  5. SC Disk Replacement
    By RXDI2 in forum 4-Tec Performance
    Replies: 4
    Last Post: 03-02-2006, 11:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •