Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,063
    +1
    790

    FS: 2007 motor $1850

    This is with out head and timming chain.

    The bottom end has 30 hours and is in great condition. Some paint is comming off. But all in all great bottom end.

    Front and back pumps in awesome 30 hours shape.

    Pistons and all. The only thing off of it is the head and timming chain.

    Chain broke and it bent 2 intake valves ever so slightly. the cam was just at the perfect spot to only allow the 2 number 1 intake valves to ben slightly bent. I am not gonna fix it and it is a easy fix. I am just gonna sell it.

    I was with Ray sundace today and ridding it to make sure some one got a great engine and it happened. Iused rays boat to test the motors as to not sell someone junk. I bought them off a 200 speedster. The motor ran flawless for 2 hours today and than this.

    $1850 + Shipping! I will even give you the valve cover and stuff.


    Austin


  2. #2

    Join Date
    Jul 2005
    Location
    Lake Dunlap, Texas
    Posts
    1,600
    +1
    28
    I was with Austin (Water4fire) today for testing of this motor. He installed it in my GTX and ran it for about two hours to make sure the motor was good. At about 5000 RPMs the timing chain let go. Austin lucked out as only two valves were only very slighty bent and only a small mark on the piston. I havent talked to him to know if he will put a new timing chain on it or not. Will make someone a very good motor.

  3. #3
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,063
    +1
    790
    I had PMed Duke for some input and he said, most likely there was rust in the valve guides and it caused the valve to stick causeing the chain to break.
    The motor is apart and on my work bench it looks perfect besides the head.
    I may just order the parts and fix it to sell a perfect motor.

    Austin

  4. #4
    Student of Speed rxpwhistler1's Avatar
    Join Date
    Nov 2007
    Location
    Oakland County Michigan
    Posts
    708

    motor

    GREAT PRICE!!!! Somebody should jump all over this deal!!!

  5. #5
    Hydrotoys's Avatar
    Join Date
    Jul 2005
    Location
    Mesa, AZ
    Posts
    16,712
    +1
    85
    dayum! great price for a bottom end!

  6. #6
    lcoach3042's Avatar
    Join Date
    Jun 2007
    Location
    Ct 06111
    Posts
    116
    +1
    5

    motor for sale

    PM sent.

  7. #7
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,063
    +1
    790
    PM's are answered.

    It comes with

    Front and back oil pumps. Perfect shape
    Pto houseing complete
    the whole bottom end crank and CB and bearings and pistons and I will say they look perfect clean as hell and still have the white coat on the bearings. It shows signs of paint chiping and peeling.

    Things to do to make it perect.

    Timming chain
    Head
    head gasget
    PTO gasket if my 2 hour old one doesn't come right off for you to install chain.
    Pistons and cylinders look real good.

    I am gonna part it next, but would like to end up at $1850 for it all.

    .

  8. #8
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,063
    +1
    790
    Motor is pending Sale! Lcoach.

    .

  9. #9
    JD 1's Avatar
    Join Date
    Aug 2005
    Location
    St. Louis, MO
    Posts
    4,186
    +1
    90
    Quote Originally Posted by Water4fire View Post
    PM's are answered.

    It comes with

    Front and back oil pumps. Perfect shape
    Pto houseing complete
    the whole bottom end crank and CB and bearings and pistons and I will say they look perfect clean as hell and still have the white coat on the bearings. It shows signs of paint chiping and peeling.

    Things to do to make it perect.

    Timming chain
    Head
    head gasget
    PTO gasket if my 2 hour old one doesn't come right off for you to install chain.
    Pistons and cylinders look real good.

    I am gonna part it next, but would like to end up at $1850 for it all.

    .
    dont forget if the chain needs replace you'll have to split the cases and get new hardware for the bottom end. bolts, flywheel bolts, sealant, orings, etc......

  10. #10
    Water4fire's Avatar
    Join Date
    May 2005
    Location
    New Braunfels TX.
    Posts
    10,063
    +1
    790
    Quote Originally Posted by JD 1 View Post
    dont forget if the chain needs replace you'll have to split the cases and get new hardware for the bottom end. bolts, flywheel bolts, sealant, orings, etc......
    Dan is correct, but the motor is getting shipped to NilS.


    .

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. FS: 2007 4tec cyl. head - Like new- perfect!
    By boostaholic in forum Sea Doo Classifieds
    Replies: 10
    Last Post: 08-28-2008, 12:16 AM
  2. FS 2007 Ultra LX
    By bsmith45 in forum Kawasaki Skis
    Replies: 0
    Last Post: 07-01-2008, 04:52 PM
  3. FS 2007 ultra 250x $9700 w/trailer
    By 13xracing in forum Kawasaki Skis
    Replies: 1
    Last Post: 06-30-2008, 09:00 PM
  4. FS: 61x motor nj
    By addicted in forum Yamaha Classifieds
    Replies: 0
    Last Post: 06-26-2008, 02:51 PM
  5. FS 2007 Kawasaki Ultra 250x - Red Rocker
    By bwilso1 in forum Kawasaki Skis
    Replies: 7
    Last Post: 06-26-2008, 10:01 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •