Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14
  1. #1

    Join Date
    Feb 2009
    Location
    Grand Haven, MI
    Posts
    4

    Cheapest place for Wiseco Top End Kit?

    I'm rebuilding my 97 Hurricane and just wondering where to find the cheapest Wiseco top end rebuild kit. Thanks for your help.


  2. #2
    casey67's Avatar
    Join Date
    Sep 2006
    Location
    Lemont,IL
    Posts
    2,571
    +1
    35
    For the domestic engines I think the WSM pistons work better. There are a bunch on E-bay

  3. #3
    Saving the Manuals every day.. TheBlueMartin's Avatar
    Join Date
    May 2009
    Location
    Pure Michigan
    Posts
    488
    +1
    1
    Go to your local machine shop or hot-rod shop. Anyone with a Wiseco dealership can get you the pistons, just look them up online yourself and walk in with the part number.
    Im using Wiseco's in my SeaDoo rebuild right now, and it was much cheaper to get a WSM full re-seal kit and wrist pin bearings, and just two Wiseco pistons (they come with rings, wrist pins, and c-clips).

  4. #4
    She likes the bike. But the ski gets her wet!!!! xlint89's Avatar
    Join Date
    Oct 2006
    Location
    Cleveland OH
    Posts
    17,330
    +1
    31
    This was the best I could find last year. Since then prices have gone up across the board everywhere.....

    http://www.atvparts.biz/jet-ski-part...iston-kit.html

  5. #5
    WSM is complete and utter garbage. I purchased wsm for the 1200 domestic and ended up buying wiseco. Other then they are both round they have very little in common. Only good thing about wsm is they are half the price.

  6. #6
    Saving the Manuals every day.. TheBlueMartin's Avatar
    Join Date
    May 2009
    Location
    Pure Michigan
    Posts
    488
    +1
    1
    So what do WSM pistons lack from OEM standards? I know a lot of people, including myself, that are happy with their WSMs.

  7. #7
    casey67's Avatar
    Join Date
    Sep 2006
    Location
    Lemont,IL
    Posts
    2,571
    +1
    35
    Quote Originally Posted by leavundst View Post
    WSM is complete and utter garbage. I purchased wsm for the 1200 domestic and ended up buying wiseco. Other then they are both round they have very little in common. Only good thing about wsm is they are half the price.
    Yes,weisco is deffinetly different from factory,that is why they suck!
    WSM is like factory specs. If your guy can't figure out how to work on any 2 stroke engine,just ask.

  8. #8
    Saving the Manuals every day.. TheBlueMartin's Avatar
    Join Date
    May 2009
    Location
    Pure Michigan
    Posts
    488
    +1
    1
    Quote Originally Posted by casey67 View Post
    Yes,weisco is deffinetly different from factory,that is why they suck!
    WSM is like factory specs. If your guy can't figure out how to work on any 2 stroke engine,just ask.
    Wiseco's dont suck either, they are just denser than stock cast pistons, and expand at a different rate. If you know what your doing, neither should be a problem.

  9. #9
    She likes the bike. But the ski gets her wet!!!! xlint89's Avatar
    Join Date
    Oct 2006
    Location
    Cleveland OH
    Posts
    17,330
    +1
    31
    Quote Originally Posted by leavundst View Post
    WSM is complete and utter garbage. I purchased wsm for the 1200 domestic and ended up buying wiseco. Other then they are both round they have very little in common. Only good thing about wsm is they are half the price.
    I'd like to hear your reasoning for this statement. Many have used WSM and had no issues.

    Many have used Wiseco and HAD issues, myself included.

    Wiseco has since changed the pistons (heavier now) I think to accomodate the issues they were having with rapid expansion.

    I do know that everyone agrees that the Wiseco gapping specs are off. Everyone has gapped them larger than spec according to directions.

  10. #10

    Join Date
    Jun 2008
    Location
    Bullhead City AZ.
    Posts
    451
    +1
    2

    Wiseco pistons

    I have got a lot of Pistons kits front www.ShortBlocksRus.com They also have a complete in house machine shop
    Good Luck

Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Cheapest place for Triple fuel pump & carbs kits?
    By Buck3yeRideR in forum Polaris Open Discussion
    Replies: 2
    Last Post: 06-20-2011, 10:04 PM
  2. WSM top end kit for 1200PV
    By SCW920 in forum Yamaha PWC Performance (2-stroke)
    Replies: 1
    Last Post: 07-10-2010, 09:04 AM
  3. FS WSM top end kit for 800
    By birel33 in forum Yamaha Classifieds
    Replies: 1
    Last Post: 07-28-2008, 10:54 AM
  4. ULTRA 150 complete top end kit for 1 cylinder, used, good shape
    By turbocycle in forum Kawasaki Classifieds
    Replies: 0
    Last Post: 05-29-2008, 08:25 AM
  5. Place to buy top end kits
    By Normyshants in forum Kawasaki Open Discussion
    Replies: 0
    Last Post: 07-30-2007, 12:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •