Above Forum Ads



No announcement yet.

Parting Out or Selling 94' Mastercraft WetJet Duo Pair

  • Time
  • Show
Clear All
new posts

  • FS Parting Out or Selling 94' Mastercraft WetJet Duo Pair

    Click image for larger version

Name:	1.jpg
Views:	1
Size:	118.6 KB
ID:	5100758Click image for larger version

Name:	2.jpg
Views:	1
Size:	148.8 KB
ID:	5100759Click image for larger version

Name:	3.jpg
Views:	1
Size:	69.9 KB
ID:	5100760Click image for larger version

Name:	4.jpg
Views:	1
Size:	69.6 KB
ID:	5100761Click image for larger version

Name:	5.jpg
Views:	1
Size:	47.0 KB
ID:	5100762

    I bought a set of these for the trailer they are on, so instead of fixing them I'm just going to part them out. They are both 94' Mastercraft WetJet Duos. Both run well, but the starters are bad. They still turn over well enough to get a compression reading with the plugs out, but don't turn over strong enough anymore to start the engine with the plugs in. 150-151 PSI on every cylinder. Both were used last summer and winterized

    Here is a link to an Ebay listing for one of the motors: http://www.ebay.com/itm/1994-Masterc...#ht_291wt_1153

    As you can see, I have excellent feedback and am not out to screw anyone over.

    If anyone is interested in buying the WetJets outright while they are still together, I would sell them complete for $550 each. These skis are worth putting a starter into them! They are very clean and solid and 100% made in USA.

    I am in Lambertville, MI. If you have any questions or need any other parts, please text me 734-347-472seven. Sometimes I don't get PM's from the forums.


  • #2


    • #3


      • #4
        Both flywheels, stators, and electrical boxes are sold. Hulls are gone, but I still have pretty much everything else from inside the hulls. Exhaust/water box, good complete motor and carb, 1 complete motor I'm parting out (lower case is chipped by the stator housing), handlebars, steering column, start/stop switch, kill switch assembly with working lanyard, seats, etc...


        • #5


          • #6
            its a longshot... but do you have anything left


            • #7
              Shoot me a text. 734-347-4727. I may not have what you need but I know someone who likely does.


              • #8
                I didn't just want to randomly text you, but I'm looking for a replacement Stator Plate Assembly and a replacement CDI unit. Any chance you have these? Thanks.