who is doing/has done what swaps/

[SUCKMYWAKE]

just wondering what swaps everyone has tried,is trying, is gonna try/
and i am the first to post here.ha

[Chrisrokc]

just wondering what swaps everyone has tried,is trying, is gonna try/
and i am the first to post here.ha

In the next couple of summers after I see what yamaha puts out gpr wise if anything....

I am going to think about doing a conversion ski.

It would be a GPR hull and an Evo motor with a t60-1.

[addicted]

I'm gonna put a mercruiser in a ultra 2fiddy.

[ph2ocraft]

I've been toying with the idea of a 4 stroke in a Polaris MSX hull, I was kind of thinking the Honda Turbo with some nitro mods. Roughly 287HP, in the MSX hull, hmnnnnn.

[SUCKMYWAKE]

i really liked the looks of the polaris al, i had seen only one on the water though

[stvdrag225]

I am still working on my 2.5 V6 GSX

[CrazyA]

I've been toying with the idea of a 4 stroke in a Polaris MSX hull, I was kind of thinking the Honda Turbo with some nitro mods. Roughly 287HP, in the MSX hull, hmnnnnn.

I don't know Al. With the limited Honda mods available, and what you already have AND know you can GET in the 2 stroke world, why would you do that?
Unless of course it would just be for fun and because you wanted a 4 stroke, and if that's the case, drop a 300HP RXP motor in that bad boy!!!
I love the Polaris MSX hull, but at some point we're going to need to address that 148mm pump issue. (like 2 years ago!!!)

[H204YOU]

My Honda swap project is on the thread Bye-Bye Yamaha,if any one has any interest.Lots of rain and no work have been holding me back financially,and a garage fire almost burnt me out,but Ive got the hull stripped down and making a few changes,to make it different.Also working on a pressure releasing shoe so we can get all the horspower thru the pump on these conversions.All the HP in the world is not going to do any good till someone learns to pass the buck legitimitly,so its back to the drawing board (or welding shop)for me

[ph2ocraft]

crazy, I was looking at the Honda plant because I have access to one for the right price. With the spare MSX that I can play with I kind of feel like playing with some other items.
The 1450 2 stroke is going to propel me into the 80MPH zone. I have no doubt about that and I'm going have fun with it BUT I really need to get in on this conversion stuff.
I really want to see if I can get the job done.
Besides if Honda goes by the way-side, what 2 better manufacture parts to have mated? Honda and Polaris, Hmmmnnn-just sounds different.