GPRXP Open Loop Cooling

[RX951]

I updated my set up with a gate valve instead of a 1/4 turn valve.

I now have some adjustability between 150 and 165. The difference is only about 1/8 of a turn where on the other valve it was almost 50 degrees.

Cudos to the guys that took the time to set this open loop up. I cant imagine the struggles they had to go through on the SD side to get it down to hoses and restrictors.

thats my next install, gate valve, s I get rid of this dang BallValve

[Insanediego Joe]

sounds like the polaris t stat is going to be a winner... hook a brother up marky!

[Hydrotoys]

Cudos to the guys that took the time to set this open loop up. I cant imagine the struggles they had to go through on the SD side to get it down to hoses and restrictors.

All they had to do was listen to Rapid acceleration. He set the first one up on the XPL conversion ski.

sounds like the polaris t stat is going to be a winner... hook a brother up marky!

No hickups so far. Let's give it a while before doing another one. It's holding nicely around 160.

[RX951]

that T-stat set up looks easy....I assume ebay item, easy to find? or OEM parts finder

[Hydrotoys]

No, Yes, No.





EDIT: Really Billy, let me get some time on it. I should know something by 10 hours.

[raul466]

GUYS IM RUNNING AN OPEN LOOP SYSTEM ON MY GPRXP NOW THE QUESTION IS IM USING 3/4 LINES ALL AROUND IS THAT GOING TO AFFECT MY PRESSURE AND ENGINE TEMPS????? PLEASE HELP

[Insanediego Joe]

GUYS IM RUNNING AN OPEN LOOP SYSTEM ON MY GPRXP NOW THE QUESTION IS IM USING 3/4 LINES ALL AROUND IS THAT GOING TO AFFECT MY PRESSURE AND ENGINE TEMPS????? PLEASE HELP

yep sure is going to. lots of threads to read how to do this right.

[RX951]

Ballvalve

Mark and the ballvalve dance




Me throwin' a Texas sized fit

[beerdart]

[Hydrotoys]

hee hee hee hee