Above Forum Ads



No announcement yet.

Kawasaki STX 15F cluster issue

  • Filter
  • Time
  • Show
Clear All
new posts

  • Kawasaki STX 15F cluster issue

    Hey guys, it's been a while since I posted on this forum. So I will get straight to the point. I have a 2010 STX 15F that's been perfect with no issues at all until now. So I was at the beach riding with no issues and then the display switched off and back on but the ski still stayed on and nothing changed. What got my attention is the beep that the cluster/display makes. Anyway, it's stuck in SLO on the display and doesn't matter what I press, nothing changers on the cluster. I have hooked the hose to it and runs fine also and revs right to the limit and doesn't feel like it's lost power or anything. What do you guys think? Just keep riding it or not? Display shows everything fine, just can't toggle thru the modes or anything. Thanks in advance guys

  • #2
    Sounds like the push button switches in the display are going bad. There are a couple of videos on YouTube showing how to remove the faceplate from the display, which would give you access to service the switches.
    '15 Kawi Ultra 310X
    '99 Kawi Ultra 150 (2)
    '10 Kawi Ultra LX, '13 Kawi Ultra LX, '13 Kawi Ultra LX parts 'Ski
    '04 Kawi STX 15-F, '06 STX 15-F (2)
    '91 Kawi Jet Mate
    '97 Yamaha Exciter 220 (Boat)
    '99 Yamaha Exciter 270 (Boat)
    '78 Nacra 5.2 Catamaran
    '05 Windrider WR-10 Trimaran, '05 Windrider WR-16 Trimaran
    ... and that's just the boats! I'm living proof that you can have too many toys!