sxr 1500 and 15f motor

[Sandr0]

Hello
Did you ever fit the STX-15F intake manifold to the SXR 1500 hull? I am wondering the same thing since the STX-15F intakes are at greater supply.

hello
i have a 2008 stx 15f and im planning to buy a sxr 1500 hull
my question is can i take the parts from the 15f into the sxr or i will need to buy other parts
do they have the same pump, electrics
can i cancel the gauge of the 15f

[mr_magookw]

Is it possible to cancel the gauge from the 15f

[smokeysevin]

You will just have to try and see how the 15f manifold fits once you get the motor in. The rest should be reasonably simple to switch over.

Sean

[mr_magookw]

This is what I have exactly from the sxr Parts included are hull , hood , pole bracket , pole , steering , scoop grate , ride plate , air box , water box
And the 15f is a complete running 2008 ski

[smokeysevin]

Similar but not the same. Keep the electrics and engine matching and you should be okay. The sxr uses a different intake manifold and the 15f one may not fit. I would not try and swap the intake manifolds tbough as the tunes may be different.

Sean

[mr_magookw]

hello
i have a 2008 stx 15f and im planning to buy a sxr 1500 hull
my question is can i take the parts from the 15f into the sxr or i will need to buy other parts
do they have the same pump, electrics
can i cancel the gauge of the 15f