Cooling Block-Off Valve

[CJ River Rider]

Gents,

I want to add a cooling block-off valve on my STX-15F in case I ever need to get towed. See below, do I have this in the correct spot? Thanks in advance.

[smokeysevin]

To the best of my knowledge you just need to keep the Waterbox from filling up which can be done by blocking off the line under the waterbox at the front of the waterbox. Ill make sure today or tomorrow though.

[sirbreaksalot]

Correct Sean , put valves in ALL incoming water lines both sides of the block on the top of the pump , and then you WILL be safe

Waz

[CJ River Rider]

So I put a valve in each hose coming off part 16?

Thanks.

[jetdave56]

Good idea those cooling line block offs....but how many skiers with open loop cooling systems have that set up...tow slow,and put a towel in the intake or even remove the hoses from the strainer...again if its a long tow....I'll be with you all the way bro"