Installing ride plate

[jonyv1]

Hi guys. Finally getting the rebuilt pump from Impros tomorrow. I was wondering if i need to use some sort of sealer on the bolts when i put the ride plate back on? I also saw the the ride plate had silicone sealer around the edges when i took it off. Do i need to seal that as it was sealed before i too it off? Thaks.

[DH300]

I'd put silicone around the edges for sure.

[lasportsmn]

Blue locktight on the threads and silicone is not needed. Just more work next time you want to remove it. I have not used silicone since the first plate change

[Oheezy404]

Hi guys. Finally getting the rebuilt pump from Impros tomorrow. I was wondering if i need to use some sort of sealer on the bolts when i put the ride plate back on? I also saw the the ride plate had silicone sealer around the edges when i took it off. Do i need to seal that as it was sealed before i too it off? Thaks.

Now would bet a great time to add a Solas impeller a after market intake grate and ride plate and pump shoe kit. (:

[Spooling]

Blue locktight on the threads and silicone is not needed. Just more work next time you want to remove it. I have not used silicone since the first plate change

----------------------
I used to seal the Ultra-150 plate I had with silicone - yet never used that stuff on my Ultra-300x and everything's fine.

BTW Kawasaki does not use silicone on their Ultra-300x ride plates OEM.

Good Luck !!!

[UnleashedBeast]

BTW Kawasaki does not use silicone on their Ultra-300x ride plates OEM.

My stock 2015 310X had the entire ride plate and grate sealed with silicone.

[Gsmith88]

Mine did too. Put locktite on the bolts and silicone the edges .. Takes an extra few minutes.