Above Forum Ads

Collapse

Announcement

Collapse
No announcement yet.

300x ODI grip install

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • 300x ODI grip install

    Any pictures or specifications on an installed set of ODI grips?

  • #2
    what a about a video seriously measure the oem grip and subtract the outer rubber end cap this is the size you will need, you will have to cut the end plate off the oem bars to slid the odi's on. its all in the tech section
    310R

    Comment


    • #3
      Originally posted by nicjak
      what a about a video seriously measure the oem grip and subtract the outer rubber end cap this is the size you will need, you will have to cut the end plate off the oem bars to slid the odi's on. its all in the tech section

      Ok than... I installed a set on my 260x looks like the same deal! Thank you for the sarcasm

      Comment


      • #4
        rob without this getting into a tit for tat bullshit session i did post a wink , if you had done this previously how could you think it would be any different?
        310R

        Comment


        • #5
          I know they widen the bars on the 300x, just double checking if these puppies will fit the new ride...

          Comment


          • #6
            I like the signature series!

            Comment


            • #7
              Originally posted by UltraRob
              I know they widen the bars on the 300x, just double checking if these puppies will fit the new ride...
              Hmmmm....they widen the bars? Do you mean kawasaki widened the bars on the 300x OR do you mean the grips widen the "stance" of the bars when holding them?
              ....Do they widen the distance of your hands when holding on or just add space due to the spacer thing-a-ma-bob on the end of the grip?
              To me it feels like the bars should be wider...then again I am 6'8". If I can add an inch or so with just a grip that would be cool.
              '09 FZR: 82.9 mph-GPS
              Riva air intake - Riva FF exhaust - Intake man. upgrade -R&D intake grate - R&D Sponsons - Foam inserts removed - R&D rideplate - Riva Power cooler + BOV - R&D 14.5/22 prop - R&D powershot - R&D C3 wheel -Riva RRFPR (54) - Riva SC shaft kit - R&D VTS cam kit - Riva adj. nozzle (83mm )- TBM pump cone - R&D transom mod - TBM fuel tank - R&D eng./intercooler kit - Innovate LC-1- boost gauge - pet tach 2100 - R2 and Powershot tuned.

              KAWI 300X: 73.5 mph...Sort-of-STOCK

              Comment


              • #8
                The 300 bars are a couple inches wider than previous skis.

                Comment


                • #9
                  Check out these grips. My friend has them on his 300 and his other skiis and loves them. He rides in some big waves and says the ends help him keep his hands on the bars.
                  http://www.rei.com/product/752277/er...nce-grip-gc2-l Your hands slip a little more with these but better on the palm of your hands.

                  http://www.rei.com/product/768219/serfas-pro-flo-grips He says his hands stay on these a little better because it has the grip all the way around.
                  Save up to 25% off retail by becoming an AMSOIL Preferred Customer

                  Kevin Stubaus AMSOIL Direct Jobber
                  www.TrySyntheticOil.com Email: TrySyntheticO[email protected]
                  1-800-AMSOIL-4U (267-6454)

                  Comment


                  • #10
                    Originally posted by 800AMSOIL4U
                    Check out these grips. My friend has them on his 300 and his other skiis and loves them. He rides in some big waves and says the ends help him keep his hands on the bars.
                    http://www.rei.com/product/752277/er...nce-grip-gc2-l Your hands slip a little more with these but better on the palm of your hands.

                    http://www.rei.com/product/768219/serfas-pro-flo-grips He says his hands stay on these a little better because it has the grip all the way around.

                    Thanks for the link.

                    I'm gonna give them a try. My concern though is that they may be schite if you change your riding position. ie. going from sitting down to standing up. They remind me of the oakley grips I had on my supergoose bmx circa 1980!!!

                    Comment


                    • #11
                      i noticed ocean cowboy had them on his 250, seems he is long gone from here
                      310R

                      Comment


                      • #12
                        COMFORT AND CONVENIENCE
                        ÔÇó New wider handlebars are more comfortable and provide lighter steering feel
                        ÔÇó Five-way adjustable handlebars allow operation while standing or sitting and suit a wide range of riders
                        ÔÇó Reshaped seat is comfortable whether riding stand-up, seated or with passengers
                        ÔÇó Two-piece seat offers roomy accommodations for three people
                        ÔÇó Ergonomic deck design gives plenty of legroom
                        ÔÇó A long rear boarding step and dual grab handles makes it easy to climb onboard, and the step retracts inside the bumper to prevent damage
                        ÔÇó A quick and easy hose connection allows an easy method to flush sea water out of the engine
                        ÔÇó Mirrors are mounted to the upper deck to facilitate opening of the hatch cover

                        Comment


                        • #13
                          rob the bars were extended to fit the extra controls and to make steering easier/lighter, the grips are the same length as the 250/260
                          310R

                          Comment


                          • #14
                            Originally posted by nicjak
                            rob the bars were extended to fit the extra controls and to make steering easier/lighter, the grips are the same length as the 250/260
                            Sweet! I'm cutting Tommorow

                            Comment


                            • #15
                              Originally posted by eel
                              Thanks for the link.

                              I'm gonna give them a try. My concern though is that they may be schite if you change your riding position. ie. going from sitting down to standing up. They remind me of the oakley grips I had on my supergoose bmx circa 1980!!!
                              I saw you riding the old beast, last weekend
                              Work Hard
                              Play Hard
                              Root Hard
                              Ride Hard

                              09 Ultra 260 and 08 Ultra 250
                              something for the wives to do while your riding.
                              http://www.eggdecoratingsupplies.com

                              Comment

                              Working...
                              X
                              😀
                              🥰
                              🤢
                              😎
                              😡
                              👍
                              👎