Above Forum Ads



No announcement yet.

2015 ultra 310 rebuild - almost done 4 wires?

  • Time
  • Show
Clear All
new posts

  • 2015 ultra 310 rebuild - almost doneÔǪ 4 wires?

    Melted pistons, Kawi Performance replate, new pistons, etc. I thought I marked everything but I have 5 electrical connectors that I can figure out. The wiring diagram doesn't help which means I am missing something. Any help would be appreciated.

    Attached Files

  • #2
    The round, flat, white one with one wire is the oil temp. It goes by above the oil filter.
    '15 Kawi Ultra 310X
    '99 Kawi Ultra 150 (2)
    '10 Kawi Ultra LX, '13 Kawi Ultra LX, '13 Kawi Ultra LX parts 'Ski
    '04 Kawi STX 15-F, '06 STX 15-F (2)
    '91 Kawi Jet Mate
    '97 Yamaha Exciter 220 (Boat)
    '99 Yamaha Exciter 270 (Boat)
    '78 Nacra 5.2 Catamaran
    '05 Windrider WR-10 Trimaran, '05 Windrider WR-16 Trimaran
    ... and that's just the boats! I'm living proof that you can have too many toys!


    • #3
      Thanks! I should be able to get to that one without removing anything. I have no skin left on my arms and fingers from the engine install. Which, BTW, requires removal of almost EVERYTHING.