Tweet
Guys, get your orders in now as these kits from the first batch will sell out quickly. To use monitoring with AFR you will need three items, the Home Service Application, PLX Device and HDMI Expansion Store. All links to order are listed below.
FYI this is not the logging App. The Logging app will be released at a later date. This App will enable you to do diagnostics on your ski that you have a tuning license for and will enable you to view engine parameters in real time on the MaptunerX display. You can mount your MaptunerX on your ski using the Silicone case with RAM mount
NOTE: With the home service application, you can do the following. For you guys running MaptunerX reflashes, you can reset history. This means you can flash your ECU back to stock and clear RPM history before taking your ski back into the dealer for service work. This makes the reflash undetectable.
Home Service App
Read & Clear Fault Codes
Displays active & past fault codes recorded in the ECU along with description of each fault. Reset fault codes with push of a button.
Program DESS Keys
Add or delete DESS (digitally encoded security system) keys. Also permits user to program each key with one of three key types: Normal, Learning, or Rental. Provides option to disable DESS security function making it possible to start the vehicle with any key.
Reset Throttle
Prompts ECU to record the minimum & maximum throttle position (TPS) values in the ECU. This function must be performed when the throttle body or the ECU is replaced.
Reset Service
Allows user to reset service light which starts countdown to next factory programmed service interval. Also displays important service information including date of last service, hours since last service & total running hours.
Reset History
This function will erase the recorded running history in the ECU. Recorded diagnostic information such as RPM, sensor readings, etc. will be deleted from ECU memory.
Monitor
Allows real time viewing of vital vehicle data, letting you see far beyond your dashboard gauge. This information is critical for performance tuning and service diagnostics. Monitors and displays multiple vehicle parameters including: Temperature Sensors, RPM, Speed, Ignition Timing, TPS, MAP Sensor & Battery Voltage. Also displays LAMBDA/02 with optional accessories listed below.
FYI this is not the logging App. The Logging app will be released at a later date. This App will enable you to do diagnostics on your ski that you have a tuning license for and will enable you to view engine parameters in real time on the MaptunerX display. You can mount your MaptunerX on your ski using the Silicone case with RAM mount
 |
Silicone case for MaptunerX Water and dirt resistant silicone case for Maptuner X. This silicone case comes complete with RAM mount and screws to make attaching to your ski in a... |
01-MT041 | $39.95 |
 |
MaptunerX Sea Doo Diagnostic Home Service Application The ultimate system for home maintenance and quick troubleshooting on your BRP vehicle! This application turns your Maptuner X into a user friendly... |
RS110-HSA | $249.95 |
 |
PLX Wideband Air/Fuel Sensor Module PLX's next generation wideband oxygen sensor controller with intelligent health monitoring technology and current for improved sensor performance.... |
897346002726 | $179.99 |
 |
MaptunerX HDM Expansion Cable Connects Maptuner X to accessories such as Lambda/02 monitoring devices. This HDMI male/female 3.5mm cable is required for monitoring and logging... |
01-MT019 | $19.95 |
NOTE: With the home service application, you can do the following. For you guys running MaptunerX reflashes, you can reset history. This means you can flash your ECU back to stock and clear RPM history before taking your ski back into the dealer for service work. This makes the reflash undetectable.
Home Service App
Read & Clear Fault CodesDisplays active & past fault codes recorded in the ECU along with description of each fault. Reset fault codes with push of a button.
Program DESS KeysAdd or delete DESS (digitally encoded security system) keys. Also permits user to program each key with one of three key types: Normal, Learning, or Rental. Provides option to disable DESS security function making it possible to start the vehicle with any key.
Reset ThrottlePrompts ECU to record the minimum & maximum throttle position (TPS) values in the ECU. This function must be performed when the throttle body or the ECU is replaced.
Reset ServiceAllows user to reset service light which starts countdown to next factory programmed service interval. Also displays important service information including date of last service, hours since last service & total running hours.
Reset HistoryThis function will erase the recorded running history in the ECU. Recorded diagnostic information such as RPM, sensor readings, etc. will be deleted from ECU memory.
MonitorAllows real time viewing of vital vehicle data, letting you see far beyond your dashboard gauge. This information is critical for performance tuning and service diagnostics. Monitors and displays multiple vehicle parameters including: Temperature Sensors, RPM, Speed, Ignition Timing, TPS, MAP Sensor & Battery Voltage. Also displays LAMBDA/02 with optional accessories listed below.
Comment