MaptunerX Diagnostic System for Sea Doo Available Now!!!

[whatnissan]

I have a tuning license for my ski and a tune on it. I just bought these home app cause I was told that I could reset my maintenance required light on my ski for the supercharger and it couldn’t wouldn’t do that . I was also told if I bough the home app I could read codes and reset maintenance lights on other skis with out the tuning license ..... it doesn’t do that. It doesn’t do really anything over the basic just tuning license and the MaptunerX.. I’m waiting on Riva to get back to me but as of now I feel like the home service app was a complete waste of money. If it can’t do at least one of those 2 things I’m going to get my money back because I feel pretty mislead .

[FAMT]

No you need to buy each maintenance for each ski, but in an Seadoo tuning file is the maintenance included....

[whatnissan]

So am I to understand that once you buy the Maptuner x you still have to buy the software to reset maintenance codes and whatnot ? I was under the impression it did all this out of the box ..

[Green Hulk]

I purchase the Maptuner and license, yesterday I connect to my rxp300 add new vehicle, and then sync to my pc, I had a massage that the vin is allready used by other user
its already programmed with other Maptuner..
unfairly I purchase my license??? That not a problem, I would use it to another ski, but I allready use the code to start my new Maptuner...

Contact [email protected] and he will get you fixed right up

[Rocco85]

I purchase the Maptuner and license, yesterday I connect to my rxp300 add new vehicle, and then sync to my pc, I had a massage that the vin is allready used by other user
its already programmed with other Maptuner..
unfairly I purchase my license??? That not a problem, I would use it to another ski, but I allready use the code to start my new Maptuner...

[Davrac]

MapX can hold 10keys per ski

[CMNSPAM]

im interested in this tool. the description implies that you have to buy a licence for each ski after the first one. Am i correct? if so, how much is each licence?

anyone know the max number of keys that can be programmed to a ski?

2005 Seadoo RXT

[Green Hulk]

JESUS G is it possible i have wrong maptuner X app/software for my vin? My exhaust temp @80F (1740 ohms) show 165F on monitoring and logging. Hooked my old ios logger up and it reads 79.4F

His support email is [email protected]
you will get a faster answer that way.

[Merritt]

JESUS G is it possible i have wrong maptuner X app/software for my vin? My exhaust temp @80F (1740 ohms) show 165F on monitoring and logging. Hooked my old ios logger up and it reads 79.4F

[JESUS G]

I’m aware, but as far as the monitoring app, why isn’t it available for viewing instead of a few of the useless parameters it displays? Knock is just as important as AFR and it would be nice/useful to monitor it while riding.

Because Bosch ECU is more complicated than that. Knock doesn't work on Bosch ECUs like it does on Vipec, Motec or any other stand alone ecu.



Here is the thing ...or what I will advise. Monitoring is to check that there is not dangerous values... so once you check AFR is "safe" you can use the log app to make a logged file, so you can adjust fuel and timing.


A logged file is a ride for 5 min aprox. then you can see and check logged file to see where and what you need to adjust.

[Snyper]

Maptuner can log Knock... You just need to know how to read timing.


In seadoo we log , main ignicion, ignition 1, 2 and 3


So when ignition drops a couple of degrees or drop very gradually , that is not knock. It's ignition correction due to engine and intake temps.

When you get 5 or more degrees down...normally that is knock...but could be also for too many reasons. Not always knock means you have a high timing, could be bad fueling, also vibrations in the prop, etc.


So it's just about to learn how to read and interpret the values in the log

I'm aware, but as far as the monitoring app, why isn't it available for viewing instead of a few of the useless parameters it displays? Knock is just as important as AFR and it would be nice/useful to monitor it while riding.

[JESUS G]

I had it and it was awful. I ended up trading for the monitoring app. Seems kind of useless to be able to monitor things like air flow and MAP but not knock....what’s the point in monitoring anything if you can’t view the most important details of the engine?

Maptuner can log Knock... You just need to know how to read timing.


In seadoo we log , main ignition, ignition 1, 2 and 3


So when ignition drops a couple of degrees or drop very gradually , that is not knock. It's ignition correction due to engine and intake temps.

When you get 5 or more degrees down...normally that is knock...but could be also for too many reasons. Not always knock means you have a high timing, could be bad fueling, also vibrations in the prop, etc.


So it's just about to learn how to read and interpret the values in the log

[Snyper]

Not through the diagnostic app, for monitoring knock, and all other engine parameters you need the data logging kit

MaptunerX Data Logging Kit This kit contains everything you need to log and analyze valuable information from your YAMAHA & BRP vehicles with your Maptuner X. Application will...

RY11UNI-LOG-KIT

$479.85

I had it and it was awful. I ended up trading for the monitoring app. Seems kind of useless to be able to monitor things like air flow and MAP but not knock....what's the point in monitoring anything if you can't view the most important details of the engine?

[Green Hulk]

Will we ever be able to monitor knock through this app?

Not through the diagnostic app, for monitoring knock, and all other engine parameters you need the data logging kit

MaptunerX Data Logging Kit This kit contains everything you need to log and analyze valuable information from your YAMAHA & BRP vehicles with your Maptuner X. Application will...

RY11UNI-LOG-KIT

$479.85

[Snyper]

Yes,

In the main screen in Maptuner device, go to "Information"

then click on "Units"


Then select if you want to display in Celcius or Farenheit

Will we ever be able to monitor knock through this app?