Need help fixing 2002 Virage TX and Virage TXi

[Grocery man]

I have 2 02 Polaris virage txi and a tx.

The tx after starting it revs up by its self and idles hight then it will die.

And the txi the rear pump just runs with out hiting the button by the starter .

And my name is Cody

[K447]

Welcome Cody.

Create a separate thread for one of your two machines, and keep the details about the other machine in this thread. It is easier to keep track of what is what if there is only one machine per thread

Diagnostics for the Ficht fuel injected engine are very different from the carburetor engine.

Are these machines new to you?

What diagnostics have you done so far?

[Grocery man]

I have had the ski sence July .
When I bought it, it started but then I put it in the water and then it wouldn't start
I put in a new starter bendix and clean the carbs.
Then it need that part behind the starter I had a guy in town do that.
Last I put a new 1st carb the one with the fuel exculator . It finally ran but not 100%. I winterized it and now it won't run .
It starts then idles hight and smokes a lot . In the water it revs then dies?

[K447]

I have had the ski since July .

When I bought it, it started but then I put it in the water and then it wouldn't start
I put in a new starter Bendix and clean the carbs.

Then it need that part behind the starter. I had a guy in town do that.

Last I put a new 1st carb the one with the fuel exculator . It finally ran but not 100%.

I winterized it and now it won't run .

It starts then idles high and smokes a lot . In the water it revs then dies?

This would the Virage TX, correct?

This machine has never worked properly for you, correct?

How were the carbs cleaned? Was a carb rebuild kit used for each carb? OEM carb kits?

What was the part behind the starter, that was replaced?

When cranking the engine, check the battery voltage using a multi-meter.
What is the battery voltage while the engine is cranking, with all spark plugs in place?

[Grocery man]

This would the Virage TX, correct?

This machine has never worked properly for you, correct?

How were the carbs cleaned? Was a carb rebuild kit used for each carb? OEM carb kits?

What was the part behind the starter, that was replaced?

When cranking the engine, check the battery voltage using a multi-meter.
What is the battery voltage while the engine is cranking, with all spark plugs in place?

Yes it's the tx
sparyed with carb cleaner
yes it was replaced

[Mr. GP1800]

When you cleaned the carbs did you actually remove and disassemble them to clean them?

[Grocery man]

When you cleaned the carbs did you actually remove and disassemble them to clean them?

Yes I did

[K447]

...
This machine has never worked properly for you, correct?

... OEM carb kits?

What was the part behind the starter, that was replaced?

When cranking the engine, check the battery voltage using a multi-meter.
What is the battery voltage while the engine is cranking, with all spark plugs in place?

Answers please.