Above Forum Ads

Collapse

Announcement

Collapse
No announcement yet.

Polaris sl 1050 Weak spark on Mag

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Polaris sl 1050 Weak spark on Mag

    My polaris sl 1050 1997 has weak spark on the mag cylidner ( the one closest to the fuel tank ) it spark once right and the rest is either weak or no spark at all the ski starts and revs 6100 on water what might be the problem thank you ( it
    doesnt have the stator update kit )

    Thank you very much for your help!

  • #2
    It seems likely that you need the Ignition Update kit.

    Alternative, with no guarantee, is to replace the stator with a known good 'original type' stator. If you are lucky, that might solve the problem. But, the original stators are known to fail over time, so the replacement 'old style' stator may or may not last very long.

    It is also possible that the old CDI is failing, either by itself, or in conjunction with the old stator.

    The best bet is to install the Update Kit.
    sigpic
    How to post your question, AFTER you have done your homework
    Asking for help via Private Message?
    For Ficht EMM Repairs, contact Lakeside Tech
    Yamaha NanoXcel hull repair info
    Polaris PWC useful info

    Comment


    • #3
      Where is it possible to find this ignition update kit ?


      Thank you for responding quick!

      Comment


      • #4
        Originally posted by Polaris sl 780
        My polaris sl 1050 1997 has weak spark on the mag cylidner ( the one closest to the fuel tank ) it spark once right and the rest is either weak or no spark at all the ski starts and revs 6100 on water what might be the problem thank you ( it
        doesnt have the stator update kit )

        Thank you very much for your help!
        I would do the "ignition coil tests", I believe it will also test the ignition wires to verify those parts are good.
        Having 2 working cylinders you should be able to compare voltages from the CDI to the coil.

        Comment


        • #5
          unthread the boot of the wire end.clip about 3/8" off the wire,rethread the end back on
          sigpicHow Many Strokes Should It Have?
          2000 Pro1200 69.1 GPS---Bad Attitude,2000 Virage Tx 67.9 gps---Organ Donor
          2000 Virage Tx 63.2 GPS---Sir Vesa,2000 Virage Sx 54.6 gps---Mrs Behavin

          Comment


          • #6
            Originally posted by TxPro1200
            unthread the boot of the wire end. clip about 3/8" off the wire, rethread the end back on
            My bad for skipping over these basic checks and jumping to the Ignition Upgrade Kit
            sigpic
            How to post your question, AFTER you have done your homework
            Asking for help via Private Message?
            For Ficht EMM Repairs, contact Lakeside Tech
            Yamaha NanoXcel hull repair info
            Polaris PWC useful info

            Comment

            Working...
            X
            😀
            🥰
            🤢
            😎
            😡
            👍
            👎