Triple Outlet fuel pump line plugs

[RobbyP]

I have a 92 SL650 I got for free about 6 months ago. Ive rebuilt the carbs and am going to do the triple outlet pump mod also. I know I need to cap off two ports on the back of the carbs. What should I use to cap them off? My pump did not come with caps.

Thanks

[xlint89]

I like to use a little loctite and thread a small machine screw into the brass barb. I then use a cheap rubber vacuum hose cap from the auto parts store to cap it.

I've also seen people use a small piece of fuel hose, bend it over and clamp it.

Whatever you do, make sure it doesn't leak. You don't want fuel leaking inside the ski while under way.

[Myself]

I just run a little piece of hose from one to the other. Hooking the 2 together and basically dead ending both of them. I've done a dozen or so that way.

[RobbyP]

I just run a little piece of hose from one to the other. Hooking the 2 together and basically dead ending both of them. I've done a dozen or so that way.

So you just connect the two spots on the carbs that are plugged off in the triple outlet fuel diagram?

[Myself]

Yes.....loop together with tubing.