Slx seat rebuild

[ttbone72]

http://www.greenhulk.net/showthread.php?t=243270

I have done a few of these but shipping is crazy

[henryb]

This is what I used. The seat base is polyethylene.

http://www.urethanesupply.com/Airless-Welders-1/5700HT/

Now that it's been a few years, how did your welds hold up?

[Mr. GP1800]

Now that it’s been a few years, how did your welds hold up?

Still good

[Trael76]

Seat 1998 Polaris slxh

Do you still repair seats for a 1998 Polaris slxh

a lot of work went into this.for me to kit it i'd want like $200.00 per kit comlpete w/hardware.most people wouldn't want to uncover the seat,so a very dense and hard aluminum is need to accept tapped threads.the material i used is aircraft grade,very tough and hard to cut.my goal was to show how the seats can be repaired and we can keep these polari going. besides if somebody wants to slip me a 20 i'll send the plate material with the patterns on it

[Drkvampire2001]

Do you still repair seats for a 1998 Polaris slxh

Best to get rid of that troublesome seat and get a 99-01 Slx/Pro 1200 Seat