Sea Doo Supercharger Rebuild Service

[Green Hulk]

This original post is from 2011, but all information is still valid.

I have been rebuilding Sea-Doo superchargers for over a decade and have the most experience to ensure your supercharger is rebuilt correctly. I only use the genuine Sea-Doo supercharger rebuild kits and will not settle for less. My turn around time is only one day. The supercharger rebuild service can be ordered >HERE< in the forums store. The service includes the price of a new genuine Sea-Doo supercharger rebuild kit and the labor to perform the rebuild on your supercharger.

Once you place the order for the rebuild service in the GreenHulk store please ship your supercharger to the following address:

4-Tec Performance (order number here)
att: Supercharger rebuild
105 Roderick St.
Morgan City, LA 70380







If you have questions after reading the information below please contact me via email at [email protected]

Sea Doo Supercharger Rebuild Service We have been rebuilding Sea Doo superchargers for over a decade and have the most experience to ensure your supercharger is rebuilt correctly. We...

SD SC Rebuild Service

$436.00 ... more info

[rich9426]

Rebuild

Hi Jerry, I am in the process of taking my super charger off my 2007 180 Challenger SE. I will be sending it out on Monday the 14th. I was looking for a total for the parts and work. Please let me know. Thanks

[rich9426]

All set its on its way. Thanks

[NEWORLEANS-YAT]

how much just to change to new Viton oil seal?

thanks

[jsluss]

Jerry,

I heard nothing but great things about you. Planning on pulling my supercharger this week and sending it out to you. Whats your turnaround time? Thanks..

Jeff
2003 gtx SC LTD w/105 hours

[Green Hulk]

how much just to change to new Viton oil seal?

thanks

I charge $30 for just doing that and checking slip on the clutch and shimming if necessary.

---------- Post added at 09:26 PM ---------- Previous post was at 09:25 PM ----------

Jerry,

I heard nothing but great things about you. Planning on pulling my supercharger this week and sending it out to you. Whats your turnaround time? Thanks..

Jeff
2003 gtx SC LTD w/105 hours

Sounds great Jeff. My turn around time is usually 1 day.

[Mark82]

Hi,

Is it suitable to send SC for rebuild to you from Australia?
Not sure how much shipping would be?

[Green Hulk]

Hi,

Is it suitable to send SC for rebuild to you from Australia?
Not sure how much shipping would be?

It may be best to let me sell you a new one. I'm not sure how much your freight would be to get the supercharger to me, but I can tell you that shipping a 9 pound package with your supercharger in it back to Australia would cost you $81.10 with express mail
Express Mail?« International [More info about Express Mail?« International]
(Calculate Guaranteed Date)
Max. length 36", max. length plus girth 79"
3 - 5 business days
$81.10



Or $69.15 with Priority mail
Priority Mail?« International [More info about Priority Mail?« International]
Max. length 42", max. length plus girth combined 79"
6 - 10 business days
$69.15

[Mark82]

It may be best to let me sell you a new one. I'm not sure how much your freight would be to get the supercharger to me, but I can tell you that shipping a 9 pound package with your supercharger in it back to Australia would cost you $81.10 with express mail
Express Mail?« International [More info about Express Mail?« International]
(Calculate Guaranteed Date)
Max. length 36", max. length plus girth 79"
3 - 5 business days
$81.10




Or $69.15 with Priority mail
Priority Mail?« International [More info about Priority Mail?« International]
Max. length 42", max. length plus girth combined 79"
6 - 10 business days
$69.15

Thanks for the info. Out of interest what would a new sc cost?
Also if I go with the rebuild could you recommend a mild cost effective upgrade for the impeller?
I still want to run stock components so not looking for big boost gain.

[Green Hulk]

Thanks for the info. Out of interest what would a new sc cost?
Also if I go with the rebuild could you recommend a mild cost effective upgrade for the impeller?
I still want to run stock components so not looking for big boost gain.

A new supercharger is $780

A very good supercharger upgrade for your stock supercharger is the Riva GEN II impeller

http://www.4-tecperformance.com/index.php?main_page=product_info&cPath=18_63&products_id=810

[Mark82]

A new supercharger is $780

A very good supercharger upgrade for your stock supercharger is the Riva GEN II impeller
http://www.4-tecperformance.com/inde...roducts_id=810

Thanks for the info.
Will I need a valve train or retainer upgrade or any other parts if I fit the Riva GENII impeller?
What sort of horsepower gain would be expected over stock with 4"air?
Could I send my supercharger for rebuild adding the extra cost for the Riva impeller and asume the same costs as rebuilding stock sc?

Thanks

[QWKRN U]

oops forgot about including payment and such.
just sent the wifes charger in today. Its from a 185 hp model. Didnt notice any shaft play or worn items, but once ya get it,(fedex says itll be there Wednesday) let me know what it needs.

[Green Hulk]

Thanks for the info.
Will I need a valve train or retainer upgrade or any other parts if I fit the Riva GENII impeller?
What sort of horsepower gain would be expected over stock with 4"air?
Could I send my supercharger for rebuild adding the extra cost for the Riva impeller and asume the same costs as rebuilding stock sc?

Thanks

The only time you need to upgrade your valve train is when you install an aftermarket ECU capable of higher RPM's.
The Gen II supercharger impeller gives an added 14 HP over the stock impeller. I don't charge anything extra to install the supercharger impeller since I have the supercharger completely apart anyway.

---------- Post added at 01:50 PM ---------- Previous post was at 01:48 PM ----------

oops forgot about including payment and such.
just sent the wifes charger in today. Its from a 185 hp model. Didnt notice any shaft play or worn items, but once ya get it,(fedex says itll be there Wednesday) let me know what it needs.

If it's got 100 hours or close to that then it will need a complete rebuild. Here's the link to order the rebuild kit in my online store

http://www.4-tecperformance.com/index.php?main_page=product_info&cPath=18_63&products_id=340

Thank you,
Jerry

[QWKRN U]

If it's got 100 hours or close to that then it will need a complete rebuild. Here's the link to order the rebuild kit in my online store

http://www.4-tecperformance.com/index.php?main_page=product_info&cPath=18_63&products_id=340

Thank you,
Jerry

Done
Order Number is: 15853

[Rxpcash]

does anyone have instuctions or a video of rebuilding a 215 s/c? sean had a link for it but it doesnt work, thanks i am a certified mechanic and would like to learn how to do it on my own