DIY rrfpr ??

[tocullo]

http://img708.imageshack.us/i/imageqax.jpg/

On this picture the yellow line where does it go? Also the factory pump has a niple that I believe is a breather. What should I do with that?

Thanks
Sent from my iPad

[Danny]

http://img708.imageshack.us/i/imageqax.jpg/


On this picture the yellow line where does it go? Also the factory pump has a niple that I believe is a breather. What should I do with that?

Thanks
Sent from my iPad

That is your boost reference line, attaches to the manifold. As boost pressure increases, it puts pressure on the regulator to increase line pressure...which pushes more fuel through your injectors.

[MSRXP]

http://img708.imageshack.us/i/imageqax.jpg/


On this picture the yellow line where does it go? Also the factory pump has a niple that I believe is a breather. What should I do with that?

Thanks
Sent from my iPad

Post a picture of the nipple you are talking about please.

[tocullo]

That is your boost reference line, attaches to the manifold. As boost pressure increases, it puts pressure on the regulator to increase line pressure...which pushes more fuel through your injectors.

Can I hook this line to the intercooler block off? I have the fizzle block off which it has 3 plugs, would it be ok to have the boost gauge and that line on the bock off?

Thanks

[tocullo]

That is your boost reference line, attaches to the manifold. As boost pressure increases, it puts pressure on the regulator to increase line pressure...which pushes more fuel through your injectors.

Can I hook this line to the intercooler block off? I have the fizzle block off which it has 3 plugs, would it be ok to have the boost gauge and that line on the bock off?

Thanks

[tocullo]

Post a picture of the nipple you are talking about please.

This is the only pic I could find. Is the niple behind the 90*.

Thanks

[Hondapro210]

For the money you have spent in the past week just for security buy the riva RRFPR, I'm in the same boat and I didn't wanna buy it but the DIY 100.00 is not worth a engine IMO..

[MSRXP]

This is the only pic I could find. Is the niple behind the 90*.

Thanks

That needs to be hooked back up to the hose that vents to the right side of the hull under the rub rail.

[MSRXP]

For the money you have spent in the past week just for security buy the riva RRFPR, I'm in the same boat and I didn't wanna buy it but the DIY 100.00 is not worth a engine IMO..

Not worth the engine? All a regulator is comprised on is a housing with a spring inside. Nothing more. Pressure is pressure no matter what the source. I have been running mine for over 30 hrs with NO or ZERO problem. Running 11.8-11.9 SOLIDLY at WOT. I can easily adjust for cooler air.

[Sayers]

For the money you have spent in the past week just for security buy the riva RRFPR, I'm in the same boat and I didn't wanna buy it but the DIY 100.00 is not worth a engine IMO..

I have an Aeromotive reg good for 1000hp and a full return system, instead of the dead leg Riva style (nothing wrong with Riva setup). I'd doubt it's going to cost me my engine!

[tocullo]

That needs to be hooked back up to the hose that vents to the right side of the hull under the rub rail.

Cool, what about the boost Line for the regulator? Can i hook that one to the fizzle intercooler block off?
Keeping in mind that my boost gauge is connected there. The fizzle intercooler block off has 3 plugs.

[Hondapro210]

Ok maybe I didn't word it correct, what I ment was not built correctly could cause some engine damage.

[tocullo]

Cool, what about the boost Line for the regulator? Can i hook that one to the fizzle intercooler block off?
Keeping in mind that my boost gauge is connected there. The fizzle intercooler block off has 3 plugs.

Can somebody answer my ?? Please

Thanks

[krouchchocolate]

Can somebody answer my ?? Please

Thanks

You can attach it to the IC blockoff or if you have a newer ski >06, then you can also attach it to the nipple that lubes the Throttle body.

[Hondapro210]

Can somebody answer my ?? Please

Thanks

Yes you can hook up there, fizzle put three for that reason...